10 cosmetic ingredients from Ubiquinone / CoQ10 to Ushira Root Extract. Every entry carries the INCI name, CAS number where one is assigned, solubility, typical use level, pH range, the phase to add it in, and the regulatory position — then links straight to the material.
Global — Synthetic / nature-identical / botanical / biotech
SUPPLY FORM
Powder / liquid depending grade
SOLUBILITY
Oil Soluble — Oil-soluble. Add to the oil phase; will not disperse in water without a solubiliser or emulsifier.
TYPICAL USE LEVEL
0.05–0.5%
pH RANGE
any
ADD AT
Oil phase, heat to dissolve
FUNCTIONS
Antioxidant; oxidative-stress support
USED IN
Serums, creams, masks
STORAGE
Store at 15–25 °C protected from light, air and moisture. Use inert-gas blanketing where available and decant under low light. Once opened, use promptly.
Global — Synthetic sodium aluminium sulphosilicate
SUPPLY FORM
Fine powder
SOLUBILITY
Dispersion Only — Practically insoluble in water and oil. Used as a dispersed solid; requires shear, a wetting agent and an anti-settling system.
TYPICAL USE LEVEL
0.1–15% depending on shade and format
pH RANGE
any
ADD AT
Dispersed / grind phase
FUNCTIONS
Colouring
USED IN
Eye makeup, colour correctors, mineral makeup
STORAGE
Store in the original sealed container in a cool, dry place at 15–25 °C, away from direct sunlight and moisture. Re-seal immediately after weighing; many powders are hygroscopic.
PACK SIZES
50 g to 5 Kg
REGULATORY
Permitted colour, application area and purity specification vary by market; confirm CI status and certification
Dispersion Only — Practically insoluble in water and oil. Used as a dispersed solid; requires shear, a wetting agent and an anti-settling system.
TYPICAL USE LEVEL
0.1–15% depending on shade and format
pH RANGE
any
ADD AT
Dispersed / grind phase
FUNCTIONS
Colouring
USED IN
Eye makeup, colour correction
STORAGE
Store in the original sealed container in a cool, dry place at 15–25 °C, away from direct sunlight and moisture. Re-seal immediately after weighing; many powders are hygroscopic.
PACK SIZES
50 g to 5 Kg
REGULATORY
Permitted colour, application area and purity specification vary by market; confirm CI status and certification
Dispersion Only — Practically insoluble in water and oil. Used as a dispersed solid; requires shear, a wetting agent and an anti-settling system.
TYPICAL USE LEVEL
0.1–15% depending on shade and format
pH RANGE
any
ADD AT
Dispersed / grind phase
FUNCTIONS
Color / coverage / optical effect
USED IN
Makeup, tinted skincare, hair color where applicable
STORAGE
Store in the original sealed container in a cool, dry place at 15–25 °C, away from direct sunlight and moisture. Re-seal immediately after weighing; many powders are hygroscopic.
PACK SIZES
50 g to 5 Kg
REGULATORY
Color additives are tightly market- and application-specific; certification requirements may apply
Grade Dependent — Solubility is grade-dependent. Confirm the exact carrier system and dilution route on the supplier technical data sheet before formulating.
TYPICAL USE LEVEL
0.5–5% for liquid/glycolic extracts; 0.1–1% for dry powder extracts
pH RANGE
4.0–7.0
ADD AT
Water phase, cool-down
FUNCTIONS
Antioxidant; conditioning
USED IN
Masks, toners
STORAGE
Store in a tightly closed container at 15–25 °C, away from direct sunlight. Protect from freezing and from prolonged heat.
PACK SIZES
50 g to 5 Kg
REGULATORY
Exact INCI, plant part, solvent and allergen profile verification
Grade Dependent — Solubility is grade-dependent. Confirm the exact carrier system and dilution route on the supplier technical data sheet before formulating.
TYPICAL USE LEVEL
0.5–5% liquid; 0.1–1% powder
pH RANGE
4.0–7.0
ADD AT
Water phase, cool-down
FUNCTIONS
Conditioning; hydration; antioxidant / film-forming depending material
USED IN
Skin, masks, hair, body
STORAGE
Store in the original sealed container in a cool, dry place at 15–25 °C, away from direct sunlight and moisture. Re-seal immediately after weighing; many powders are hygroscopic.
Global — Biotech / metabolite / plant extracellular vesicle
SUPPLY FORM
Powder / stabilized dispersion
SOLUBILITY
Glycol Soluble — Soluble in glycols (glycerin, propanediol, butylene glycol, propylene glycol) and in water-glycol blends. Pre-dissolve in the glycol before adding to the water phase.
TYPICAL USE LEVEL
No single published figure applies to every grade of this material. As a working rule, start water-phase actives at 0.5–2%, oil-phase actives at 1–5%, standardised or potent isolates at 0.05–0.5%, and supplier-diluted solutions at the percentage the technical data sheet specifies. Always confirm the exact level against the supplier TDS, your stability and compatibility testing, and the safety assessment for your finished product.
pH RANGE
formulation-dependent
ADD AT
As per the supplier technical data sheet
FUNCTIONS
Mitochondrial positioning
USED IN
High-end serums / R&D formulations
STORAGE
Store in the original sealed container in a cool, dry place at 15–25 °C, away from direct sunlight and moisture. Re-seal immediately after weighing; many powders are hygroscopic.
PACK SIZES
10 g to 1 Kg
REGULATORY
High diligence: exact identity, claims, safety, INCI and jurisdiction-specific review
INCI Vetiveria Zizanoides Root Extract · CAS not assigned
FAMILY
Botanical extract
ORIGIN
India / Ayurveda — Vetiveria Zizanoides root
SUPPLY FORM
Powder / liquid extract; solvent system supplier-dependent
SOLUBILITY
Grade Dependent — Solubility is grade-dependent. Confirm the exact carrier system and dilution route on the supplier technical data sheet before formulating.
TYPICAL USE LEVEL
0.5–5% for liquid/glycolic extracts; 0.1–1% for dry powder extracts
pH RANGE
4.0–7.0
ADD AT
Water phase, cool-down
FUNCTIONS
Cooling
USED IN
Skin and/or hair care
STORAGE
Store in a tightly closed container at 15–25 °C, away from direct sunlight. Protect from freezing and from prolonged heat.
PACK SIZES
50 g to 5 Kg
REGULATORY
Exact INCI, plant part, solvent and allergen profile verification
How to read these entries. Use levels and pH ranges are typical formulation starting points for a cosmetic raw material, not approvals. A published INCI name does not by itself authorise use: confirm permitted status, maximum concentration, restrictions by product type, labelling and claim rules in every market you sell into, and give every finished product its own safety assessment. Entries marked with a regulatory flag carry a binding limit somewhere — the product page states which framework and what the limit is.
