50 cosmetic ingredients from Macadamia Oil to Methionine. Every entry carries the INCI name, CAS number where one is assigned, solubility, typical use level, pH range, the phase to add it in, and the regulatory position — then links straight to the material.
Store in a cool, dark place in a well-filled, tightly closed container. Minimise headspace and light exposure to limit oxidation; refrigeration extends shelf life for polyunsaturated oils.
Global — Synthetic / nature-identical / botanical / biotech
SUPPLY FORM
Powder / liquid depending grade
SOLUBILITY
Water Soluble — Water-soluble. Disperse into the water phase with stirring; avoid prolonged high heat where the material is heat-sensitive.
TYPICAL USE LEVEL
No single published figure applies to every grade of this material. As a working rule, start water-phase actives at 0.5–2%, oil-phase actives at 1–5%, standardised or potent isolates at 0.05–0.5%, and supplier-diluted solutions at the percentage the technical data sheet specifies. Always confirm the exact level against the supplier TDS, your stability and compatibility testing, and the safety assessment for your finished product.
pH RANGE
formulation-dependent
ADD AT
As per the supplier technical data sheet
FUNCTIONS
Soothing / repair
USED IN
Body, face or scalp depending active
STORAGE
Store in a tightly closed container at 15–25 °C, away from direct sunlight. Protect from freezing and from prolonged heat.
Global — Synthetic / nature-identical / botanical / biotech
SUPPLY FORM
Powder / liquid depending grade
SOLUBILITY
Water Soluble — Water-soluble. Disperse into the water phase with stirring; avoid prolonged high heat where the material is heat-sensitive.
TYPICAL USE LEVEL
No single published figure applies to every grade of this material. As a working rule, start water-phase actives at 0.5–2%, oil-phase actives at 1–5%, standardised or potent isolates at 0.05–0.5%, and supplier-diluted solutions at the percentage the technical data sheet specifies. Always confirm the exact level against the supplier TDS, your stability and compatibility testing, and the safety assessment for your finished product.
pH RANGE
formulation-dependent
ADD AT
As per the supplier technical data sheet
FUNCTIONS
Soothing / repair
USED IN
Body, face or scalp depending active
STORAGE
Store in a tightly closed container at 15–25 °C, away from direct sunlight. Protect from freezing and from prolonged heat.
Water Dispersible — Water-dispersible rather than truly soluble. Sprinkle into vigorously stirred water or pre-wet in glycerin to avoid lumping.
TYPICAL USE LEVEL
No single published figure applies to every grade of this material. As a working rule, start water-phase actives at 0.5–2%, oil-phase actives at 1–5%, standardised or potent isolates at 0.05–0.5%, and supplier-diluted solutions at the percentage the technical data sheet specifies. Always confirm the exact level against the supplier TDS, your stability and compatibility testing, and the safety assessment for your finished product.
pH RANGE
formulation-dependent
ADD AT
As per the supplier technical data sheet
FUNCTIONS
Soothing; barrier support
USED IN
Cica ampoules, post-procedure care
STORAGE
Store in the original sealed container in a cool, dry place at 15–25 °C, away from direct sunlight and moisture. Re-seal immediately after weighing; many powders are hygroscopic.
INCI Madhuca Longifolia Flower Extract · CAS not assigned
FAMILY
Botanical extract
ORIGIN
India / Ayurveda — Madhuca Longifolia flower
SUPPLY FORM
Powder / liquid extract; solvent system supplier-dependent
SOLUBILITY
Grade Dependent — Solubility is grade-dependent. Confirm the exact carrier system and dilution route on the supplier technical data sheet before formulating.
TYPICAL USE LEVEL
0.5–5% for liquid/glycolic extracts; 0.1–1% for dry powder extracts
pH RANGE
4.0–7.0
ADD AT
Water phase, cool-down
FUNCTIONS
Conditioning
USED IN
Skin and/or hair care
STORAGE
Store in a tightly closed container at 15–25 °C, away from direct sunlight. Protect from freezing and from prolonged heat.
PACK SIZES
50 g to 5 Kg
REGULATORY
Exact INCI, plant part, solvent and allergen profile verification
Water Dispersible — Water-dispersible rather than truly soluble. Sprinkle into vigorously stirred water or pre-wet in glycerin to avoid lumping.
TYPICAL USE LEVEL
0.1–1.5%
pH RANGE
any
ADD AT
Water phase
FUNCTIONS
Viscosity; suspension; sensory
USED IN
Skin, hair, color cosmetics
STORAGE
Store in the original sealed container in a cool, dry place at 15–25 °C, away from direct sunlight and moisture. Re-seal immediately after weighing; many powders are hygroscopic.
Water Soluble — Water-soluble. Disperse into the water phase with stirring; avoid prolonged high heat where the material is heat-sensitive.
TYPICAL USE LEVEL
0.1–2%
pH RANGE
4.0–7.0
ADD AT
Water phase
FUNCTIONS
NMF support; humectancy; conditioning
USED IN
Moisturizers, serums, hair/scalp
STORAGE
Store in the original sealed container in a cool, dry place at 15–25 °C, away from direct sunlight and moisture. Re-seal immediately after weighing; many powders are hygroscopic.
Water Dispersible — Water-dispersible rather than truly soluble. Sprinkle into vigorously stirred water or pre-wet in glycerin to avoid lumping.
TYPICAL USE LEVEL
No single published figure applies to every grade of this material. As a working rule, start water-phase actives at 0.5–2%, oil-phase actives at 1–5%, standardised or potent isolates at 0.05–0.5%, and supplier-diluted solutions at the percentage the technical data sheet specifies. Always confirm the exact level against the supplier TDS, your stability and compatibility testing, and the safety assessment for your finished product.
pH RANGE
formulation-dependent
ADD AT
As per the supplier technical data sheet
FUNCTIONS
NMF support; humectancy; conditioning
USED IN
Moisturizers, serums, hair/scalp
STORAGE
Store in the original sealed container in a cool, dry place at 15–25 °C, away from direct sunlight and moisture. Re-seal immediately after weighing; many powders are hygroscopic.
Water Dispersible — Water-dispersible rather than truly soluble. Sprinkle into vigorously stirred water or pre-wet in glycerin to avoid lumping.
TYPICAL USE LEVEL
No single published figure applies to every grade of this material. As a working rule, start water-phase actives at 0.5–2%, oil-phase actives at 1–5%, standardised or potent isolates at 0.05–0.5%, and supplier-diluted solutions at the percentage the technical data sheet specifies. Always confirm the exact level against the supplier TDS, your stability and compatibility testing, and the safety assessment for your finished product.
pH RANGE
formulation-dependent
ADD AT
As per the supplier technical data sheet
FUNCTIONS
Binding; adhesion; water repellency
USED IN
Pressed powder, eyeshadow, blush
STORAGE
Store in the original sealed container in a cool, dry place at 15–25 °C, away from direct sunlight and moisture. Re-seal immediately after weighing; many powders are hygroscopic.
Water Soluble — Water-soluble. Disperse into the water phase with stirring; avoid prolonged high heat where the material is heat-sensitive.
TYPICAL USE LEVEL
0.1–2%
pH RANGE
4.0–7.0
ADD AT
Water phase
FUNCTIONS
W/O stabilisation; bath products
USED IN
Water-in-oil emulsions, bath salts
STORAGE
Store in the original sealed container in a cool, dry place at 15–25 °C, away from direct sunlight and moisture. Re-seal immediately after weighing; many powders are hygroscopic.
INCI Magnolia Officinalis Bark Extract · CAS not assigned
FAMILY
Botanical extract
ORIGIN
China / TCM — Magnolia Officinalis bark
SUPPLY FORM
Powder / liquid extract; solvent system supplier-dependent
SOLUBILITY
Grade Dependent — Solubility is grade-dependent. Confirm the exact carrier system and dilution route on the supplier technical data sheet before formulating.
TYPICAL USE LEVEL
0.5–5% for liquid/glycolic extracts; 0.1–1% for dry powder extracts
pH RANGE
4.0–7.0
ADD AT
Water phase, cool-down
FUNCTIONS
Honokiol/magnolol-rich
USED IN
Skin and/or hair care
STORAGE
Store in a tightly closed container at 15–25 °C, away from direct sunlight. Protect from freezing and from prolonged heat.
PACK SIZES
50 g to 5 Kg
REGULATORY
Exact INCI, plant part, solvent and allergen profile verification
INCI Magnolia Liliflora Flower Extract · CAS not assigned
FAMILY
Botanical extract
ORIGIN
China / TCM — Magnolia Liliflora flower
SUPPLY FORM
Powder / liquid extract; solvent system supplier-dependent
SOLUBILITY
Grade Dependent — Solubility is grade-dependent. Confirm the exact carrier system and dilution route on the supplier technical data sheet before formulating.
TYPICAL USE LEVEL
0.5–5% for liquid/glycolic extracts; 0.1–1% for dry powder extracts
pH RANGE
4.0–7.0
ADD AT
Water phase, cool-down
FUNCTIONS
Traditional aromatic botanical
USED IN
Skin and/or hair care
STORAGE
Store in a tightly closed container at 15–25 °C, away from direct sunlight. Protect from freezing and from prolonged heat.
PACK SIZES
50 g to 5 Kg
REGULATORY
Exact INCI, plant part, solvent and allergen profile verification
INCI Eclipta Alba Whole Plant Extract · CAS not assigned
FAMILY
Botanical extract
ORIGIN
India / Ayurveda — Eclipta Alba whole plant
SUPPLY FORM
Powder / liquid extract; solvent system supplier-dependent
SOLUBILITY
Grade Dependent — Solubility is grade-dependent. Confirm the exact carrier system and dilution route on the supplier technical data sheet before formulating.
TYPICAL USE LEVEL
0.5–5% for liquid/glycolic extracts; 0.1–1% for dry powder extracts
pH RANGE
4.0–7.0
ADD AT
Water phase, cool-down
FUNCTIONS
Traditional hair care
USED IN
Skin and/or hair care
STORAGE
Store in a tightly closed container at 15–25 °C, away from direct sunlight. Protect from freezing and from prolonged heat.
PACK SIZES
50 g to 5 Kg
REGULATORY
Exact INCI, plant part, solvent and allergen profile verification
INCI Madhuca Longifolia Seed Butter · CAS not assigned
FAMILY
Botanical butter
ORIGIN
India — Madhuca Longifolia seed
SUPPLY FORM
Soft butter
SOLUBILITY
Oil Soluble — Oil-soluble. Add to the oil phase; will not disperse in water without a solubiliser or emulsifier.
TYPICAL USE LEVEL
2–15%
pH RANGE
any
ADD AT
Oil phase, melt at 60–70 °C
FUNCTIONS
Emolliency
USED IN
Body butters, traditional oils
STORAGE
Store in a cool, dark place in a well-filled, tightly closed container. Minimise headspace and light exposure to limit oxidation; refrigeration extends shelf life for polyunsaturated oils.
INCI Ophiopogon Japonicus Root Extract · CAS not assigned
FAMILY
Botanical extract
ORIGIN
China / TCM — Ophiopogon Japonicus root
SUPPLY FORM
Powder / liquid extract; solvent system supplier-dependent
SOLUBILITY
Grade Dependent — Solubility is grade-dependent. Confirm the exact carrier system and dilution route on the supplier technical data sheet before formulating.
TYPICAL USE LEVEL
0.1–1% for thickening and film forming; 0.5–3% where used as a hydrating active
pH RANGE
4.0–8.0
ADD AT
Water phase, hydrate slowly with good agitation
FUNCTIONS
Polysaccharide-rich
USED IN
Skin and/or hair care
STORAGE
Store in a tightly closed container at 15–25 °C, away from direct sunlight. Protect from freezing and from prolonged heat.
PACK SIZES
50 g to 5 Kg
REGULATORY
Exact INCI, plant part, solvent and allergen profile verification
Asia / Global — Fruiting body / mycelium; supplier-specific
SUPPLY FORM
Powder / liquid extract
SOLUBILITY
Grade Dependent — Solubility is grade-dependent. Confirm the exact carrier system and dilution route on the supplier technical data sheet before formulating.
TYPICAL USE LEVEL
0.1–1% for thickening and film forming; 0.5–3% where used as a hydrating active
Global — Synthetic / nature-identical / botanical / biotech
SUPPLY FORM
Powder / liquid depending grade
SOLUBILITY
Water Soluble — Water-soluble. Disperse into the water phase with stirring; avoid prolonged high heat where the material is heat-sensitive.
TYPICAL USE LEVEL
No single published figure applies to every grade of this material. As a working rule, start water-phase actives at 0.5–2%, oil-phase actives at 1–5%, standardised or potent isolates at 0.05–0.5%, and supplier-diluted solutions at the percentage the technical data sheet specifies. Always confirm the exact level against the supplier TDS, your stability and compatibility testing, and the safety assessment for your finished product.
pH RANGE
formulation-dependent
ADD AT
As per the supplier technical data sheet
FUNCTIONS
Resurfacing / keratolytic / texture support depending active
USED IN
Peels, serums, toners, masks
STORAGE
Store in a tightly closed container at 15–25 °C, away from direct sunlight. Protect from freezing and from prolonged heat.
Water Soluble — Water-soluble. Disperse into the water phase with stirring; avoid prolonged high heat where the material is heat-sensitive.
TYPICAL USE LEVEL
0.5–5%
pH RANGE
any
ADD AT
Water phase
FUNCTIONS
Film formation; hold; conditioning
USED IN
Hair styling, skin, makeup
STORAGE
Store in the original sealed container in a cool, dry place at 15–25 °C, away from direct sunlight and moisture. Re-seal immediately after weighing; many powders are hygroscopic.
Water Soluble — Water-soluble. Disperse into the water phase with stirring; avoid prolonged high heat where the material is heat-sensitive.
TYPICAL USE LEVEL
No single published figure applies to every grade of this material. As a working rule, start water-phase actives at 0.5–2%, oil-phase actives at 1–5%, standardised or potent isolates at 0.05–0.5%, and supplier-diluted solutions at the percentage the technical data sheet specifies. Always confirm the exact level against the supplier TDS, your stability and compatibility testing, and the safety assessment for your finished product.
pH RANGE
formulation-dependent
ADD AT
As per the supplier technical data sheet
FUNCTIONS
NMF support; humectancy; conditioning
USED IN
Moisturizers, serums, hair/scalp
STORAGE
Store in the original sealed container in a cool, dry place at 15–25 °C, away from direct sunlight and moisture. Re-seal immediately after weighing; many powders are hygroscopic.
Global — Synthetic / nature-identical / botanical / biotech
SUPPLY FORM
Powder / liquid depending grade
SOLUBILITY
Alcohol Soluble — Soluble in ethanol and in polar solvents; limited water solubility. Pre-dissolve in alcohol, glycol or a solubiliser before addition.
TYPICAL USE LEVEL
2–10%
pH RANGE
3.5–4.5
ADD AT
Pre-dissolve in alcohol or glycol
FUNCTIONS
Resurfacing / keratolytic / texture support depending active
USED IN
Peels, serums, toners, masks
STORAGE
Store in a tightly closed container at 15–25 °C, away from direct sunlight. Protect from freezing and from prolonged heat.
Water Soluble — Water-soluble. Disperse into the water phase with stirring; avoid prolonged high heat where the material is heat-sensitive.
TYPICAL USE LEVEL
0.1–2%
pH RANGE
4.0–7.0
ADD AT
Water phase
FUNCTIONS
NMF support; humectancy; conditioning
USED IN
Moisturizers, serums, hair/scalp
STORAGE
Store in the original sealed container in a cool, dry place at 15–25 °C, away from direct sunlight and moisture. Re-seal immediately after weighing; many powders are hygroscopic.
Water Dispersible — Water-dispersible rather than truly soluble. Sprinkle into vigorously stirred water or pre-wet in glycerin to avoid lumping.
TYPICAL USE LEVEL
No single published figure applies to every grade of this material. As a working rule, start water-phase actives at 0.5–2%, oil-phase actives at 1–5%, standardised or potent isolates at 0.05–0.5%, and supplier-diluted solutions at the percentage the technical data sheet specifies. Always confirm the exact level against the supplier TDS, your stability and compatibility testing, and the safety assessment for your finished product.
pH RANGE
formulation-dependent
ADD AT
As per the supplier technical data sheet
FUNCTIONS
NMF support; humectancy; conditioning
USED IN
Moisturizers, serums, hair/scalp
STORAGE
Store in the original sealed container in a cool, dry place at 15–25 °C, away from direct sunlight and moisture. Re-seal immediately after weighing; many powders are hygroscopic.
Dispersion Only — Practically insoluble in water and oil. Used as a dispersed solid; requires shear, a wetting agent and an anti-settling system.
TYPICAL USE LEVEL
0.1–15% depending on shade and format
pH RANGE
any
ADD AT
Dispersed / grind phase
FUNCTIONS
Color / coverage / optical effect
USED IN
Makeup, tinted skincare, hair color where applicable
STORAGE
Store in the original sealed container in a cool, dry place at 15–25 °C, away from direct sunlight and moisture. Re-seal immediately after weighing; many powders are hygroscopic.
PACK SIZES
50 g to 5 Kg
REGULATORY
Color additives are tightly market- and application-specific; certification requirements may apply
Store in a cool, dark place in a well-filled, tightly closed container. Minimise headspace and light exposure to limit oxidation; refrigeration extends shelf life for polyunsaturated oils.
INCI Mangifera Indica Fruit Extract · CAS not assigned
FAMILY
Botanical extract
ORIGIN
Global — Mangifera Indica fruit
SUPPLY FORM
Powder / liquid extract; solvent system supplier-dependent
SOLUBILITY
Grade Dependent — Solubility is grade-dependent. Confirm the exact carrier system and dilution route on the supplier technical data sheet before formulating.
TYPICAL USE LEVEL
0.5–5% for liquid/glycolic extracts; 0.1–1% for dry powder extracts
pH RANGE
4.0–7.0
ADD AT
Water phase, cool-down
FUNCTIONS
Conditioning; antioxidant
USED IN
Skin and/or hair care
STORAGE
Store in a tightly closed container at 15–25 °C, away from direct sunlight. Protect from freezing and from prolonged heat.
PACK SIZES
50 g to 5 Kg
REGULATORY
Exact INCI, plant part, solvent and allergen profile verification
INCI Mangifera Indica Seed Butter · CAS 90063-86-8
FAMILY
Botanical butter
ORIGIN
India — Mangifera Indica seed
SUPPLY FORM
Soft butter
SOLUBILITY
Oil Soluble — Oil-soluble. Add to the oil phase; will not disperse in water without a solubiliser or emulsifier.
TYPICAL USE LEVEL
2–15%
pH RANGE
any
ADD AT
Oil phase, melt at 60–70 °C
FUNCTIONS
Emolliency; conditioning
USED IN
Body butters, creams, hair masks
STORAGE
Store in a cool, dark place in a well-filled, tightly closed container. Minimise headspace and light exposure to limit oxidation; refrigeration extends shelf life for polyunsaturated oils.
INCI Rubia Cordifolia Root Extract · CAS not assigned
FAMILY
Botanical extract
ORIGIN
India / Ayurveda — Rubia Cordifolia root
SUPPLY FORM
Powder / liquid extract; solvent system supplier-dependent
SOLUBILITY
Grade Dependent — Solubility is grade-dependent. Confirm the exact carrier system and dilution route on the supplier technical data sheet before formulating.
TYPICAL USE LEVEL
0.5–5% for liquid/glycolic extracts; 0.1–1% for dry powder extracts
pH RANGE
4.0–7.0
ADD AT
Water phase, cool-down
FUNCTIONS
Tone support; traditional skin care
USED IN
Skin and/or hair care
STORAGE
Store in a tightly closed container at 15–25 °C, away from direct sunlight. Protect from freezing and from prolonged heat.
PACK SIZES
50 g to 5 Kg
REGULATORY
Exact INCI, plant part, solvent and allergen profile verification
Water Soluble — Water-soluble. Disperse into the water phase with stirring; avoid prolonged high heat where the material is heat-sensitive.
TYPICAL USE LEVEL
0.5–5%
pH RANGE
4.0–7.0
ADD AT
Water phase
FUNCTIONS
Microbiome support / postbiotic / prebiotic positioning
USED IN
Skin, scalp, deodorant, sensitive-skin care
STORAGE
Store in the original sealed container in a cool, dry place at 15–25 °C, away from direct sunlight and moisture. Re-seal immediately after weighing; many powders are hygroscopic.
PACK SIZES
50 g to 5 Kg
REGULATORY
Microbiome claim substantiation and exact composition review
Water Soluble — Water-soluble. Disperse into the water phase with stirring; avoid prolonged high heat where the material is heat-sensitive.
TYPICAL USE LEVEL
No single published figure applies to every grade of this material. As a working rule, start water-phase actives at 0.5–2%, oil-phase actives at 1–5%, standardised or potent isolates at 0.05–0.5%, and supplier-diluted solutions at the percentage the technical data sheet specifies. Always confirm the exact level against the supplier TDS, your stability and compatibility testing, and the safety assessment for your finished product.
pH RANGE
formulation-dependent
ADD AT
As per the supplier technical data sheet
FUNCTIONS
NMF support; humectancy; conditioning
USED IN
Moisturizers, serums, hair/scalp
STORAGE
Store in the original sealed container in a cool, dry place at 15–25 °C, away from direct sunlight and moisture. Re-seal immediately after weighing; many powders are hygroscopic.
Water Soluble — Water-soluble. Disperse into the water phase with stirring; avoid prolonged high heat where the material is heat-sensitive.
TYPICAL USE LEVEL
0.5–5%
pH RANGE
4.0–7.0
ADD AT
Water phase
FUNCTIONS
Microbiome support / postbiotic / prebiotic positioning
USED IN
Skin, scalp, deodorant, sensitive-skin care
STORAGE
Store in the original sealed container in a cool, dry place at 15–25 °C, away from direct sunlight and moisture. Re-seal immediately after weighing; many powders are hygroscopic.
PACK SIZES
50 g to 5 Kg
REGULATORY
Microbiome claim substantiation and exact composition review
Water Soluble — Water-soluble. Disperse into the water phase with stirring; avoid prolonged high heat where the material is heat-sensitive.
TYPICAL USE LEVEL
No single published figure applies to every grade of this material. As a working rule, start water-phase actives at 0.5–2%, oil-phase actives at 1–5%, standardised or potent isolates at 0.05–0.5%, and supplier-diluted solutions at the percentage the technical data sheet specifies. Always confirm the exact level against the supplier TDS, your stability and compatibility testing, and the safety assessment for your finished product.
pH RANGE
formulation-dependent
ADD AT
As per the supplier technical data sheet
FUNCTIONS
Conditioning; hydration; antioxidant / film-forming depending material
USED IN
Skin, masks, hair, body
STORAGE
Store in the original sealed container in a cool, dry place at 15–25 °C, away from direct sunlight and moisture. Re-seal immediately after weighing; many powders are hygroscopic.
INCI Hydrolyzed Collagen (Marine) · CAS not assigned
FAMILY
Protein hydrolysate
ORIGIN
Japan / Global — Fish skin and scale
SUPPLY FORM
Powder
SOLUBILITY
Water Soluble — Water-soluble. Disperse into the water phase with stirring; avoid prolonged high heat where the material is heat-sensitive.
TYPICAL USE LEVEL
1–5% of the supplied solution
pH RANGE
4.0–7.0
ADD AT
Water phase, cool-down
FUNCTIONS
Film forming; hydration
USED IN
Masks, hydrating serums, hair care
STORAGE
Cold-chain material. Store refrigerated at 2–8 °C, protect from light and return to refrigeration immediately after use. Do not freeze unless the technical data sheet says otherwise.
Powder / filtrate / oil / concentrate depending material
SOLUBILITY
Water Soluble — Water-soluble. Disperse into the water phase with stirring; avoid prolonged high heat where the material is heat-sensitive.
TYPICAL USE LEVEL
1–5% of the supplied solution
pH RANGE
4.0–7.0
ADD AT
Water phase, cool-down
FUNCTIONS
Firming / film formation
USED IN
Serums, essences, masks, creams, scalp/hair as relevant
STORAGE
Cold-chain material. Store refrigerated at 2–8 °C, protect from light and return to refrigeration immediately after use. Do not freeze unless the technical data sheet says otherwise.
Water Soluble — Water-soluble. Disperse into the water phase with stirring; avoid prolonged high heat where the material is heat-sensitive.
TYPICAL USE LEVEL
1–5% of the supplied solution
pH RANGE
4.0–7.0
ADD AT
Water phase, cool-down
FUNCTIONS
Conditioning; hydration; antioxidant / film-forming depending material
USED IN
Skin, masks, hair, body
STORAGE
Cold-chain material. Store refrigerated at 2–8 °C, protect from light and return to refrigeration immediately after use. Do not freeze unless the technical data sheet says otherwise.
Powder / filtrate / oil / concentrate depending material
SOLUBILITY
Oil Soluble — Oil-soluble. Add to the oil phase; will not disperse in water without a solubiliser or emulsifier.
TYPICAL USE LEVEL
No single published figure applies to every grade of this material. As a working rule, start water-phase actives at 0.5–2%, oil-phase actives at 1–5%, standardised or potent isolates at 0.05–0.5%, and supplier-diluted solutions at the percentage the technical data sheet specifies. Always confirm the exact level against the supplier TDS, your stability and compatibility testing, and the safety assessment for your finished product.
pH RANGE
formulation-dependent
ADD AT
As per the supplier technical data sheet
FUNCTIONS
Hydration / healthy-aging
USED IN
Serums, essences, masks, creams, scalp/hair as relevant
STORAGE
Store in the original sealed container in a cool, dry place at 15–25 °C, away from direct sunlight and moisture. Re-seal immediately after weighing; many powders are hygroscopic.
Powder / filtrate / oil / concentrate depending material
SOLUBILITY
Oil Soluble — Oil-soluble. Add to the oil phase; will not disperse in water without a solubiliser or emulsifier.
TYPICAL USE LEVEL
No single published figure applies to every grade of this material. As a working rule, start water-phase actives at 0.5–2%, oil-phase actives at 1–5%, standardised or potent isolates at 0.05–0.5%, and supplier-diluted solutions at the percentage the technical data sheet specifies. Always confirm the exact level against the supplier TDS, your stability and compatibility testing, and the safety assessment for your finished product.
pH RANGE
formulation-dependent
ADD AT
As per the supplier technical data sheet
FUNCTIONS
Microchannel / resurfacing concept
USED IN
Serums, essences, masks, creams, scalp/hair as relevant
STORAGE
Store in the original sealed container in a cool, dry place at 15–25 °C, away from direct sunlight and moisture. Re-seal immediately after weighing; many powders are hygroscopic.
PACK SIZES
10 g to 1 Kg
REGULATORY
Emerging / high regulatory and safety diligence; market-specific
INCI Althaea Officinalis Root Extract · CAS not assigned
FAMILY
Botanical extract
ORIGIN
Global — Althaea Officinalis root
SUPPLY FORM
Powder / liquid extract; solvent system supplier-dependent
SOLUBILITY
Grade Dependent — Solubility is grade-dependent. Confirm the exact carrier system and dilution route on the supplier technical data sheet before formulating.
TYPICAL USE LEVEL
0.5–5% for liquid/glycolic extracts; 0.1–1% for dry powder extracts
pH RANGE
4.0–7.0
ADD AT
Water phase, cool-down
FUNCTIONS
Mucilage / hydration
USED IN
Skin and/or hair care
STORAGE
Store in a tightly closed container at 15–25 °C, away from direct sunlight. Protect from freezing and from prolonged heat.
PACK SIZES
50 g to 5 Kg
REGULATORY
Exact INCI, plant part, solvent and allergen profile verification
Store in a cool, dark place in a well-filled, tightly closed container. Minimise headspace and light exposure to limit oxidation; refrigeration extends shelf life for polyunsaturated oils.
INCI Camellia Sinensis Leaf Powder (Matcha Grade) · CAS not assigned
FAMILY
Plant powder
ORIGIN
Japan — Shade-grown green tea leaf
SUPPLY FORM
Fine powder
SOLUBILITY
Water Dispersible — Water-dispersible rather than truly soluble. Sprinkle into vigorously stirred water or pre-wet in glycerin to avoid lumping.
TYPICAL USE LEVEL
No single published figure applies to every grade of this material. As a working rule, start water-phase actives at 0.5–2%, oil-phase actives at 1–5%, standardised or potent isolates at 0.05–0.5%, and supplier-diluted solutions at the percentage the technical data sheet specifies. Always confirm the exact level against the supplier TDS, your stability and compatibility testing, and the safety assessment for your finished product.
pH RANGE
formulation-dependent
ADD AT
As per the supplier technical data sheet
FUNCTIONS
Antioxidant; colour
USED IN
Masks, cleansing powders
STORAGE
Store in the original sealed container in a cool, dry place at 15–25 °C, away from direct sunlight and moisture. Re-seal immediately after weighing; many powders are hygroscopic.
PACK SIZES
50 g to 5 Kg
REGULATORY
Exact INCI, plant part, solvent and allergen profile verification
INCI Palmitoyl Pentapeptide-4 (and) Glycerin (and) Water · CAS 214047-00-4
FAMILY
Signal peptide solution
ORIGIN
Global — Synthetic peptide
SUPPLY FORM
Liquid
SOLUBILITY
Water Soluble — Water-soluble. Disperse into the water phase with stirring; avoid prolonged high heat where the material is heat-sensitive.
TYPICAL USE LEVEL
2–10% of the supplied solution (supplier-specified; active peptide is usually present at ppm level)
pH RANGE
4.5–7.0
ADD AT
Water phase, cool-down below 40 °C
FUNCTIONS
Collagen-support positioning
USED IN
Anti-ageing serums, eye creams
STORAGE
Cold-chain material. Store refrigerated at 2–8 °C, protect from light and return to refrigeration immediately after use. Do not freeze unless the technical data sheet says otherwise.
Store in a cool, dark place in a well-filled, tightly closed container. Minimise headspace and light exposure to limit oxidation; refrigeration extends shelf life for polyunsaturated oils.
INCI Filipendula Ulmaria Flower Extract · CAS not assigned
FAMILY
Botanical extract
ORIGIN
Global — Filipendula Ulmaria flower
SUPPLY FORM
Powder / liquid extract; solvent system supplier-dependent
SOLUBILITY
Grade Dependent — Solubility is grade-dependent. Confirm the exact carrier system and dilution route on the supplier technical data sheet before formulating.
TYPICAL USE LEVEL
0.5–5% for liquid/glycolic extracts; 0.1–1% for dry powder extracts
pH RANGE
4.0–7.0
ADD AT
Water phase, cool-down
FUNCTIONS
Salicylate / antioxidant
USED IN
Skin and/or hair care
STORAGE
Store in a tightly closed container at 15–25 °C, away from direct sunlight. Protect from freezing and from prolonged heat.
PACK SIZES
50 g to 5 Kg
REGULATORY
Exact INCI, plant part, solvent and allergen profile verification
Alcohol Soluble — Soluble in ethanol and in polar solvents; limited water solubility. Pre-dissolve in alcohol, glycol or a solubiliser before addition.
TYPICAL USE LEVEL
0.01–0.1%
pH RANGE
4.0–7.0
ADD AT
Pre-dissolve in alcohol or glycol
FUNCTIONS
Scalp / hair-cycle positioning
USED IN
Skin or scalp as relevant
STORAGE
Store in the original sealed container in a cool, dry place at 15–25 °C, away from direct sunlight and moisture. Re-seal immediately after weighing; many powders are hygroscopic.
Global — Synthetic / nature-identical / botanical / biotech
SUPPLY FORM
Powder / liquid depending grade
SOLUBILITY
Alcohol Soluble — Soluble in ethanol and in polar solvents; limited water solubility. Pre-dissolve in alcohol, glycol or a solubiliser before addition.
TYPICAL USE LEVEL
0.1–1%
pH RANGE
any
ADD AT
Pre-dissolve in alcohol or oil
FUNCTIONS
Cooling; scalp sensory
USED IN
Scalp serums, tonics, shampoos, conditioners
STORAGE
Store in a tightly closed container at 15–25 °C, away from direct sunlight. Protect from freezing and from prolonged heat.
Global — Synthetic / nature-identical / botanical / biotech
SUPPLY FORM
Powder / liquid depending grade
SOLUBILITY
Oil Soluble — Oil-soluble. Add to the oil phase; will not disperse in water without a solubiliser or emulsifier.
TYPICAL USE LEVEL
No single published figure applies to every grade of this material. As a working rule, start water-phase actives at 0.5–2%, oil-phase actives at 1–5%, standardised or potent isolates at 0.05–0.5%, and supplier-diluted solutions at the percentage the technical data sheet specifies. Always confirm the exact level against the supplier TDS, your stability and compatibility testing, and the safety assessment for your finished product.
pH RANGE
formulation-dependent
ADD AT
As per the supplier technical data sheet
FUNCTIONS
Cooling; low-odor sensory
USED IN
Scalp serums, tonics, shampoos, conditioners
STORAGE
Store in a tightly closed container at 15–25 °C, away from direct sunlight. Protect from freezing and from prolonged heat.
INCI Trigonella Foenum-Graecum Seed Extract (Standardised) · CAS not assigned
FAMILY
Botanical extract / standardised
ORIGIN
India / Ayurveda — Fenugreek seed
SUPPLY FORM
Powder / liquid extract
SOLUBILITY
Grade Dependent — Solubility is grade-dependent. Confirm the exact carrier system and dilution route on the supplier technical data sheet before formulating.
TYPICAL USE LEVEL
0.5–5% for liquid/glycolic extracts; 0.1–1% for dry powder extracts
pH RANGE
4.0–7.0
ADD AT
Water phase, cool-down
FUNCTIONS
Conditioning; mucilage
USED IN
Hair masks, scalp serums
STORAGE
Store in a tightly closed container at 15–25 °C, away from direct sunlight. Protect from freezing and from prolonged heat.
PACK SIZES
50 g to 5 Kg
REGULATORY
Exact INCI, plant part, solvent and allergen profile verification
How to read these entries. Use levels and pH ranges are typical formulation starting points for a cosmetic raw material, not approvals. A published INCI name does not by itself authorise use: confirm permitted status, maximum concentration, restrictions by product type, labelling and claim rules in every market you sell into, and give every finished product its own safety assessment. Entries marked with a regulatory flag carry a binding limit somewhere — the product page states which framework and what the limit is.
