50 cosmetic ingredients from Acacia Senegal Gum to Amodimethicone Microemulsion. Every entry carries the INCI name, CAS number where one is assigned, solubility, typical use level, pH range, the phase to add it in, and the regulatory position — then links straight to the material.
Water Dispersible — Water-dispersible rather than truly soluble. Sprinkle into vigorously stirred water or pre-wet in glycerin to avoid lumping.
TYPICAL USE LEVEL
0.5–5%
pH RANGE
any
ADD AT
Water phase, hydrate fully
FUNCTIONS
Film forming; thickening; tightening sensory
USED IN
Masks, primers, tightening products
STORAGE
Store in the original sealed container in a cool, dry place at 15–25 °C, away from direct sunlight and moisture. Re-seal immediately after weighing; many powders are hygroscopic.
Global — Synthetic / nature-identical / botanical / biotech
SUPPLY FORM
Powder / liquid depending grade
SOLUBILITY
Water Soluble — Water-soluble. Disperse into the water phase with stirring; avoid prolonged high heat where the material is heat-sensitive.
TYPICAL USE LEVEL
No single published figure applies to every grade of this material. As a working rule, start water-phase actives at 0.5–2%, oil-phase actives at 1–5%, standardised or potent isolates at 0.05–0.5%, and supplier-diluted solutions at the percentage the technical data sheet specifies. Always confirm the exact level against the supplier TDS, your stability and compatibility testing, and the safety assessment for your finished product.
pH RANGE
formulation-dependent
ADD AT
As per the supplier technical data sheet
FUNCTIONS
Antioxidant; oxidative-stress support
USED IN
Serums, creams, masks
STORAGE
Store in a tightly closed container at 15–25 °C, away from direct sunlight. Protect from freezing and from prolonged heat.
Global — Synthetic / nature-identical / botanical / biotech
SUPPLY FORM
Powder / liquid depending grade
SOLUBILITY
Water Soluble — Water-soluble. Disperse into the water phase with stirring; avoid prolonged high heat where the material is heat-sensitive.
TYPICAL USE LEVEL
No single published figure applies to every grade of this material. As a working rule, start water-phase actives at 0.5–2%, oil-phase actives at 1–5%, standardised or potent isolates at 0.05–0.5%, and supplier-diluted solutions at the percentage the technical data sheet specifies. Always confirm the exact level against the supplier TDS, your stability and compatibility testing, and the safety assessment for your finished product.
pH RANGE
formulation-dependent
ADD AT
As per the supplier technical data sheet
FUNCTIONS
Resurfacing / keratolytic / texture support depending active
USED IN
Peels, serums, toners, masks
STORAGE
Store in a tightly closed container at 15–25 °C, away from direct sunlight. Protect from freezing and from prolonged heat.
Water Soluble — Water-soluble. Disperse into the water phase with stirring; avoid prolonged high heat where the material is heat-sensitive.
TYPICAL USE LEVEL
2–10% of the supplied solution (supplier-specified; active peptide is usually present at ppm level)
pH RANGE
4.5–7.0
ADD AT
Water phase, cool-down below 40 °C
FUNCTIONS
Barrier / sensitivity
USED IN
Serums, eye care, anti-aging, scalp/hair as relevant
STORAGE
Cold-chain material. Store refrigerated at 2–8 °C, protect from light and return to refrigeration immediately after use. Do not freeze unless the technical data sheet says otherwise.
Water Soluble — Water-soluble. Disperse into the water phase with stirring; avoid prolonged high heat where the material is heat-sensitive.
TYPICAL USE LEVEL
2–10% of the supplied solution (supplier-specified; active peptide is usually present at ppm level)
pH RANGE
4.5–7.0
ADD AT
Water phase, cool-down below 40 °C
FUNCTIONS
Expression-line support
USED IN
Serums, eye care, anti-aging, scalp/hair as relevant
STORAGE
Cold-chain material. Store refrigerated at 2–8 °C, protect from light and return to refrigeration immediately after use. Do not freeze unless the technical data sheet says otherwise.
Water Soluble — Water-soluble. Disperse into the water phase with stirring; avoid prolonged high heat where the material is heat-sensitive.
TYPICAL USE LEVEL
2–10% of the supplied solution (supplier-specified; active peptide is usually present at ppm level)
pH RANGE
4.5–7.0
ADD AT
Water phase, cool-down below 40 °C
FUNCTIONS
Expression-line support
USED IN
Serums, eye care, anti-aging, scalp/hair as relevant
STORAGE
Cold-chain material. Store refrigerated at 2–8 °C, protect from light and return to refrigeration immediately after use. Do not freeze unless the technical data sheet says otherwise.
Water Soluble — Water-soluble. Disperse into the water phase with stirring; avoid prolonged high heat where the material is heat-sensitive.
TYPICAL USE LEVEL
2–10% of the supplied solution (supplier-specified; active peptide is usually present at ppm level)
pH RANGE
4.5–7.0
ADD AT
Water phase, cool-down below 40 °C
FUNCTIONS
Skin structure support
USED IN
Serums, eye care, anti-aging, scalp/hair as relevant
STORAGE
Cold-chain material. Store refrigerated at 2–8 °C, protect from light and return to refrigeration immediately after use. Do not freeze unless the technical data sheet says otherwise.
Water Soluble — Water-soluble. Disperse into the water phase with stirring; avoid prolonged high heat where the material is heat-sensitive.
TYPICAL USE LEVEL
2–10% of the supplied solution (supplier-specified; active peptide is usually present at ppm level)
pH RANGE
4.5–7.0
ADD AT
Water phase, cool-down below 40 °C
FUNCTIONS
Comfort / sensitive-skin support
USED IN
Serums, eye care, anti-aging, scalp/hair as relevant
STORAGE
Cold-chain material. Store refrigerated at 2–8 °C, protect from light and return to refrigeration immediately after use. Do not freeze unless the technical data sheet says otherwise.
Water Soluble — Water-soluble. Disperse into the water phase with stirring; avoid prolonged high heat where the material is heat-sensitive.
TYPICAL USE LEVEL
2–10% of the supplied solution (supplier-specified; active peptide is usually present at ppm level)
pH RANGE
4.5–7.0
ADD AT
Water phase, cool-down below 40 °C
FUNCTIONS
Firmness support
USED IN
Serums, eye care, anti-aging, scalp/hair as relevant
STORAGE
Cold-chain material. Store refrigerated at 2–8 °C, protect from light and return to refrigeration immediately after use. Do not freeze unless the technical data sheet says otherwise.
Water Soluble — Water-soluble. Disperse into the water phase with stirring; avoid prolonged high heat where the material is heat-sensitive.
TYPICAL USE LEVEL
2–10% of the supplied solution (supplier-specified; active peptide is usually present at ppm level)
pH RANGE
4.5–7.0
ADD AT
Water phase, cool-down below 40 °C
FUNCTIONS
Hair-density support
USED IN
Serums, eye care, anti-aging, scalp/hair as relevant
STORAGE
Cold-chain material. Store refrigerated at 2–8 °C, protect from light and return to refrigeration immediately after use. Do not freeze unless the technical data sheet says otherwise.
Global — Synthetic / nature-identical / botanical / biotech
SUPPLY FORM
Powder / liquid depending grade
SOLUBILITY
Water Soluble — Water-soluble. Disperse into the water phase with stirring; avoid prolonged high heat where the material is heat-sensitive.
TYPICAL USE LEVEL
2–10% of the supplied solution (supplier-specified; active peptide is usually present at ppm level)
pH RANGE
4.5–7.0
ADD AT
Water phase, cool-down below 40 °C
FUNCTIONS
Hair-density support
USED IN
Scalp serums, tonics, shampoos, conditioners
STORAGE
Cold-chain material. Store refrigerated at 2–8 °C, protect from light and return to refrigeration immediately after use. Do not freeze unless the technical data sheet says otherwise.
Water Soluble — Water-soluble. Disperse into the water phase with stirring; avoid prolonged high heat where the material is heat-sensitive.
TYPICAL USE LEVEL
2–10% of the supplied solution (supplier-specified; active peptide is usually present at ppm level)
pH RANGE
4.5–7.0
ADD AT
Water phase, cool-down below 40 °C
FUNCTIONS
Redness support
USED IN
Serums, eye care, anti-aging, scalp/hair as relevant
STORAGE
Cold-chain material. Store refrigerated at 2–8 °C, protect from light and return to refrigeration immediately after use. Do not freeze unless the technical data sheet says otherwise.
Water Soluble — Water-soluble. Disperse into the water phase with stirring; avoid prolonged high heat where the material is heat-sensitive.
TYPICAL USE LEVEL
2–10% of the supplied solution (supplier-specified; active peptide is usually present at ppm level)
pH RANGE
4.5–7.0
ADD AT
Water phase, cool-down below 40 °C
FUNCTIONS
Barrier / sensitivity
USED IN
Serums, eye care, anti-aging, scalp/hair as relevant
STORAGE
Cold-chain material. Store refrigerated at 2–8 °C, protect from light and return to refrigeration immediately after use. Do not freeze unless the technical data sheet says otherwise.
Water Soluble — Water-soluble. Disperse into the water phase with stirring; avoid prolonged high heat where the material is heat-sensitive.
TYPICAL USE LEVEL
2–10% of the supplied solution (supplier-specified; active peptide is usually present at ppm level)
pH RANGE
4.5–7.0
ADD AT
Water phase, cool-down below 40 °C
FUNCTIONS
Eye contour / puffiness support
USED IN
Serums, eye care, anti-aging, scalp/hair as relevant
STORAGE
Cold-chain material. Store refrigerated at 2–8 °C, protect from light and return to refrigeration immediately after use. Do not freeze unless the technical data sheet says otherwise.
Water Soluble — Water-soluble. Disperse into the water phase with stirring; avoid prolonged high heat where the material is heat-sensitive.
TYPICAL USE LEVEL
2–10% of the supplied solution (supplier-specified; active peptide is usually present at ppm level)
pH RANGE
4.5–7.0
ADD AT
Water phase, cool-down below 40 °C
FUNCTIONS
Dermal matrix support
USED IN
Serums, eye care, anti-aging, scalp/hair as relevant
STORAGE
Cold-chain material. Store refrigerated at 2–8 °C, protect from light and return to refrigeration immediately after use. Do not freeze unless the technical data sheet says otherwise.
INCI Sodium Acetylated Hyaluronate · CAS not assigned
FAMILY
Modified glycosaminoglycan
ORIGIN
Japan — Biofermentation
SUPPLY FORM
Powder
SOLUBILITY
Water Soluble — Water-soluble. Disperse into the water phase with stirring; avoid prolonged high heat where the material is heat-sensitive.
TYPICAL USE LEVEL
0.05–1%
pH RANGE
4.0–8.0
ADD AT
Water phase, hydrate slowly
FUNCTIONS
Substantive hydration; skin adhesion
USED IN
Premium essences, long-lasting hydration claims
STORAGE
Store in the original sealed container in a cool, dry place at 15–25 °C, away from direct sunlight and moisture. Re-seal immediately after weighing; many powders are hygroscopic.
Water Soluble — Water-soluble. Disperse into the water phase with stirring; avoid prolonged high heat where the material is heat-sensitive.
TYPICAL USE LEVEL
0.5–5%
pH RANGE
any
ADD AT
Water phase
FUNCTIONS
Film formation; hold; conditioning
USED IN
Hair styling, skin, makeup
STORAGE
Store in the original sealed container in a cool, dry place at 15–25 °C, away from direct sunlight and moisture. Re-seal immediately after weighing; many powders are hygroscopic.
Water Dispersible — Water-dispersible rather than truly soluble. Sprinkle into vigorously stirred water or pre-wet in glycerin to avoid lumping.
TYPICAL USE LEVEL
0.1–1.5%
pH RANGE
any
ADD AT
Water phase
FUNCTIONS
Viscosity; suspension; sensory
USED IN
Skin, hair, color cosmetics
STORAGE
Store in the original sealed container in a cool, dry place at 15–25 °C, away from direct sunlight and moisture. Re-seal immediately after weighing; many powders are hygroscopic.
Water Soluble — Water-soluble. Disperse into the water phase with stirring; avoid prolonged high heat where the material is heat-sensitive.
TYPICAL USE LEVEL
0.5–5%
pH RANGE
any
ADD AT
Water phase
FUNCTIONS
Film formation; hold; conditioning
USED IN
Hair styling, skin, makeup
STORAGE
Store in the original sealed container in a cool, dry place at 15–25 °C, away from direct sunlight and moisture. Re-seal immediately after weighing; many powders are hygroscopic.
Global — Synthetic / nature-identical / botanical / biotech
SUPPLY FORM
Powder / liquid depending grade
SOLUBILITY
Dispersion Only — Practically insoluble in water and oil. Used as a dispersed solid; requires shear, a wetting agent and an anti-settling system.
TYPICAL USE LEVEL
No single published figure applies to every grade of this material. As a working rule, start water-phase actives at 0.5–2%, oil-phase actives at 1–5%, standardised or potent isolates at 0.05–0.5%, and supplier-diluted solutions at the percentage the technical data sheet specifies. Always confirm the exact level against the supplier TDS, your stability and compatibility testing, and the safety assessment for your finished product.
pH RANGE
formulation-dependent
ADD AT
As per the supplier technical data sheet
FUNCTIONS
Adsorbent
USED IN
Body, face or scalp depending active
STORAGE
Store in a tightly closed container at 15–25 °C, away from direct sunlight. Protect from freezing and from prolonged heat.
INCI Vigna Angularis Seed Powder · CAS not assigned
FAMILY
Plant powder
ORIGIN
Japan — Adzuki bean
SUPPLY FORM
Fine powder
SOLUBILITY
Water Dispersible — Water-dispersible rather than truly soluble. Sprinkle into vigorously stirred water or pre-wet in glycerin to avoid lumping.
TYPICAL USE LEVEL
No single published figure applies to every grade of this material. As a working rule, start water-phase actives at 0.5–2%, oil-phase actives at 1–5%, standardised or potent isolates at 0.05–0.5%, and supplier-diluted solutions at the percentage the technical data sheet specifies. Always confirm the exact level against the supplier TDS, your stability and compatibility testing, and the safety assessment for your finished product.
pH RANGE
formulation-dependent
ADD AT
As per the supplier technical data sheet
FUNCTIONS
Gentle exfoliation; cleansing
USED IN
Powder cleansers, scrubs
STORAGE
Store in the original sealed container in a cool, dry place at 15–25 °C, away from direct sunlight and moisture. Re-seal immediately after weighing; many powders are hygroscopic.
PACK SIZES
50 g to 5 Kg
REGULATORY
Exact INCI, plant part, solvent and allergen profile verification
INCI Vigna Angularis Seed Extract · CAS not assigned
FAMILY
Botanical extract
ORIGIN
Global — Vigna Angularis seed
SUPPLY FORM
Powder / liquid extract; solvent system supplier-dependent
SOLUBILITY
Grade Dependent — Solubility is grade-dependent. Confirm the exact carrier system and dilution route on the supplier technical data sheet before formulating.
TYPICAL USE LEVEL
0.5–5% for liquid/glycolic extracts; 0.1–1% for dry powder extracts
pH RANGE
4.0–7.0
ADD AT
Water phase, cool-down
FUNCTIONS
Traditional cleansing / conditioning
USED IN
Skin and/or hair care
STORAGE
Store in a tightly closed container at 15–25 °C, away from direct sunlight. Protect from freezing and from prolonged heat.
PACK SIZES
50 g to 5 Kg
REGULATORY
Exact INCI, plant part, solvent and allergen profile verification
Water Dispersible — Water-dispersible rather than truly soluble. Sprinkle into vigorously stirred water or pre-wet in glycerin to avoid lumping.
TYPICAL USE LEVEL
0.5–2%
pH RANGE
any
ADD AT
Water phase, boil to dissolve then cool to set
FUNCTIONS
Gelling
USED IN
Peel-off masks, jelly textures
STORAGE
Store in the original sealed container in a cool, dry place at 15–25 °C, away from direct sunlight and moisture. Re-seal immediately after weighing; many powders are hygroscopic.
Asia / Global — Fruiting body / mycelium; supplier-specific
SUPPLY FORM
Powder / liquid extract
SOLUBILITY
Grade Dependent — Solubility is grade-dependent. Confirm the exact carrier system and dilution route on the supplier technical data sheet before formulating.
TYPICAL USE LEVEL
0.1–1% for thickening and film forming; 0.5–3% where used as a hydrating active
INCI Artemisia Argyi Leaf Extract · CAS not assigned
FAMILY
Botanical extract
ORIGIN
China / TCM — Artemisia Argyi leaf
SUPPLY FORM
Powder / liquid extract; solvent system supplier-dependent
SOLUBILITY
Grade Dependent — Solubility is grade-dependent. Confirm the exact carrier system and dilution route on the supplier technical data sheet before formulating.
TYPICAL USE LEVEL
0.5–5% for liquid/glycolic extracts; 0.1–1% for dry powder extracts
pH RANGE
4.0–7.0
ADD AT
Water phase, cool-down
FUNCTIONS
Traditional soothing
USED IN
Skin and/or hair care
STORAGE
Store in a tightly closed container at 15–25 °C, away from direct sunlight. Protect from freezing and from prolonged heat.
PACK SIZES
50 g to 5 Kg
REGULATORY
Exact INCI, plant part, solvent and allergen profile verification
INCI Trachyspermum Ammi Seed Oil · CAS not assigned
FAMILY
Essential oil
ORIGIN
India / Ayurveda — Ajwain seed
SUPPLY FORM
Liquid oil
SOLUBILITY
Oil Soluble — Oil-soluble. Add to the oil phase; will not disperse in water without a solubiliser or emulsifier.
TYPICAL USE LEVEL
0.1–1% in leave-on; up to 2–3% in rinse-off, inside IFRA limits
pH RANGE
any
ADD AT
Oil phase, cool-down
FUNCTIONS
Aromatic; traditional purifying
USED IN
Traditional formats, body oils
STORAGE
Store in a cool, dark place in a well-filled, tightly closed container. Minimise headspace and light exposure to limit oxidation; refrigeration extends shelf life for polyunsaturated oils.
PACK SIZES
50 g to 5 Kg
REGULATORY
Fragrance allergen, phototoxicity, sensitization and use-level review essential
Water Soluble — Water-soluble. Disperse into the water phase with stirring; avoid prolonged high heat where the material is heat-sensitive.
TYPICAL USE LEVEL
0.1–2%
pH RANGE
4.0–7.0
ADD AT
Water phase
FUNCTIONS
NMF support; humectancy; conditioning
USED IN
Moisturizers, serums, hair/scalp
STORAGE
Store in the original sealed container in a cool, dry place at 15–25 °C, away from direct sunlight and moisture. Re-seal immediately after weighing; many powders are hygroscopic.
INCI Albizia Julibrissin Bark Extract · CAS not assigned
FAMILY
Botanical extract
ORIGIN
China / TCM — Albizia Julibrissin bark
SUPPLY FORM
Powder / liquid extract; solvent system supplier-dependent
SOLUBILITY
Grade Dependent — Solubility is grade-dependent. Confirm the exact carrier system and dilution route on the supplier technical data sheet before formulating.
TYPICAL USE LEVEL
0.5–5% for liquid/glycolic extracts; 0.1–1% for dry powder extracts
pH RANGE
4.0–7.0
ADD AT
Water phase, cool-down
FUNCTIONS
Traditional skin care
USED IN
Skin and/or hair care
STORAGE
Store in a tightly closed container at 15–25 °C, away from direct sunlight. Protect from freezing and from prolonged heat.
PACK SIZES
50 g to 5 Kg
REGULATORY
Exact INCI, plant part, solvent and allergen profile verification
Water Dispersible — Water-dispersible rather than truly soluble. Sprinkle into vigorously stirred water or pre-wet in glycerin to avoid lumping.
TYPICAL USE LEVEL
0.5–2% (up to 10% in peel-off mask bases)
pH RANGE
any
ADD AT
Water phase, hydrate slowly
FUNCTIONS
Conditioning; hydration; antioxidant / film-forming depending material
USED IN
Skin, masks, hair, body
STORAGE
Store in the original sealed container in a cool, dry place at 15–25 °C, away from direct sunlight and moisture. Re-seal immediately after weighing; many powders are hygroscopic.
INCI Allantoin (and) Panthenol (and) Glycerin · CAS 97-59-6
FAMILY
Soothing blend
ORIGIN
Global — Nature-identical
SUPPLY FORM
Liquid
SOLUBILITY
Water Soluble — Water-soluble. Disperse into the water phase with stirring; avoid prolonged high heat where the material is heat-sensitive.
TYPICAL USE LEVEL
No single published figure applies to every grade of this material. As a working rule, start water-phase actives at 0.5–2%, oil-phase actives at 1–5%, standardised or potent isolates at 0.05–0.5%, and supplier-diluted solutions at the percentage the technical data sheet specifies. Always confirm the exact level against the supplier TDS, your stability and compatibility testing, and the safety assessment for your finished product.
pH RANGE
formulation-dependent
ADD AT
As per the supplier technical data sheet
FUNCTIONS
Soothing; barrier support
USED IN
Sensitive-skin care, baby care, after-sun
STORAGE
Store in a tightly closed container at 15–25 °C, away from direct sunlight. Protect from freezing and from prolonged heat.
Oil Soluble — Oil-soluble. Add to the oil phase; will not disperse in water without a solubiliser or emulsifier.
TYPICAL USE LEVEL
1–20% (up to 100% as a neat oil)
pH RANGE
any
ADD AT
Oil phase
FUNCTIONS
Emolliency; conditioning
USED IN
Massage oils, baby care, body oils
STORAGE
Store in a cool, dark place in a well-filled, tightly closed container. Minimise headspace and light exposure to limit oxidation; refrigeration extends shelf life for polyunsaturated oils.
INCI Aloe Barbadensis Leaf Juice · CAS not assigned
FAMILY
Plant juice
ORIGIN
India / Global — Aloe Barbadensis leaf
SUPPLY FORM
Liquid
SOLUBILITY
Water Soluble — Water-soluble. Disperse into the water phase with stirring; avoid prolonged high heat where the material is heat-sensitive.
TYPICAL USE LEVEL
No single published figure applies to every grade of this material. As a working rule, start water-phase actives at 0.5–2%, oil-phase actives at 1–5%, standardised or potent isolates at 0.05–0.5%, and supplier-diluted solutions at the percentage the technical data sheet specifies. Always confirm the exact level against the supplier TDS, your stability and compatibility testing, and the safety assessment for your finished product.
pH RANGE
formulation-dependent
ADD AT
As per the supplier technical data sheet
FUNCTIONS
Soothing; hydration
USED IN
Gels, toners, after-sun, hair products
STORAGE
Store in a tightly closed container at 15–25 °C, away from direct sunlight. Protect from freezing and from prolonged heat.
PACK SIZES
50 g to 5 Kg
REGULATORY
Exact INCI, plant part, solvent and allergen profile verification
INCI Aloe Barbadensis Leaf Extract · CAS not assigned
FAMILY
Botanical extract
ORIGIN
Global — Aloe Barbadensis leaf
SUPPLY FORM
Powder / liquid extract; solvent system supplier-dependent
SOLUBILITY
Grade Dependent — Solubility is grade-dependent. Confirm the exact carrier system and dilution route on the supplier technical data sheet before formulating.
TYPICAL USE LEVEL
0.5–5% for liquid/glycolic extracts; 0.1–1% for dry powder extracts
pH RANGE
4.0–7.0
ADD AT
Water phase, cool-down
FUNCTIONS
Hydration; soothing
USED IN
Skin and/or hair care
STORAGE
Store in a tightly closed container at 15–25 °C, away from direct sunlight. Protect from freezing and from prolonged heat.
PACK SIZES
50 g to 5 Kg
REGULATORY
Exact INCI, plant part, solvent and allergen profile verification
INCI Aloe Barbadensis Leaf Juice Powder · CAS not assigned
FAMILY
Plant powder concentrate
ORIGIN
India / Global — Aloe Barbadensis leaf
SUPPLY FORM
Powder
SOLUBILITY
Water Dispersible — Water-dispersible rather than truly soluble. Sprinkle into vigorously stirred water or pre-wet in glycerin to avoid lumping.
TYPICAL USE LEVEL
No single published figure applies to every grade of this material. As a working rule, start water-phase actives at 0.5–2%, oil-phase actives at 1–5%, standardised or potent isolates at 0.05–0.5%, and supplier-diluted solutions at the percentage the technical data sheet specifies. Always confirm the exact level against the supplier TDS, your stability and compatibility testing, and the safety assessment for your finished product.
pH RANGE
formulation-dependent
ADD AT
As per the supplier technical data sheet
FUNCTIONS
Soothing; hydration
USED IN
Any format where liquid aloe is impractical
STORAGE
Store in the original sealed container in a cool, dry place at 15–25 °C, away from direct sunlight and moisture. Re-seal immediately after weighing; many powders are hygroscopic.
PACK SIZES
50 g to 5 Kg
REGULATORY
Exact INCI, plant part, solvent and allergen profile verification
INCI Supplier-specific plant extracellular vesicles · CAS not assigned
FAMILY
Plant EV
ORIGIN
Global — Biotech / metabolite / plant extracellular vesicle
SUPPLY FORM
Powder / stabilized dispersion
SOLUBILITY
Grade Dependent — Solubility is grade-dependent. Confirm the exact carrier system and dilution route on the supplier technical data sheet before formulating.
TYPICAL USE LEVEL
1–5% of the supplied preparation (supplier-specified)
pH RANGE
5.0–7.0
ADD AT
Cool-down below 35 °C
FUNCTIONS
Emerging regenerative technology
USED IN
High-end serums / R&D formulations
STORAGE
Cold-chain material. Store refrigerated at 2–8 °C, protect from light and return to refrigeration immediately after use. Do not freeze unless the technical data sheet says otherwise.
PACK SIZES
10 g to 1 Kg
REGULATORY
High diligence: exact identity, claims, safety, INCI and jurisdiction-specific review
Global — Synthetic / nature-identical / botanical / biotech
SUPPLY FORM
Powder / liquid depending grade
SOLUBILITY
Water Soluble — Water-soluble. Disperse into the water phase with stirring; avoid prolonged high heat where the material is heat-sensitive.
TYPICAL USE LEVEL
No single published figure applies to every grade of this material. As a working rule, start water-phase actives at 0.5–2%, oil-phase actives at 1–5%, standardised or potent isolates at 0.05–0.5%, and supplier-diluted solutions at the percentage the technical data sheet specifies. Always confirm the exact level against the supplier TDS, your stability and compatibility testing, and the safety assessment for your finished product.
pH RANGE
formulation-dependent
ADD AT
As per the supplier technical data sheet
FUNCTIONS
Tone-evening / melanogenesis-pathway support depending active
USED IN
Serums, spot care, creams
STORAGE
Store in a tightly closed container at 15–25 °C, away from direct sunlight. Protect from freezing and from prolonged heat.
Global — Synthetic / nature-identical / botanical / biotech
SUPPLY FORM
Powder / liquid depending grade
SOLUBILITY
Alcohol Soluble — Soluble in ethanol and in polar solvents; limited water solubility. Pre-dissolve in alcohol, glycol or a solubiliser before addition.
TYPICAL USE LEVEL
No single published figure applies to every grade of this material. As a working rule, start water-phase actives at 0.5–2%, oil-phase actives at 1–5%, standardised or potent isolates at 0.05–0.5%, and supplier-diluted solutions at the percentage the technical data sheet specifies. Always confirm the exact level against the supplier TDS, your stability and compatibility testing, and the safety assessment for your finished product.
pH RANGE
formulation-dependent
ADD AT
As per the supplier technical data sheet
FUNCTIONS
Antioxidant; oxidative-stress support
USED IN
Serums, creams, masks
STORAGE
Store in a tightly closed container at 15–25 °C, away from direct sunlight. Protect from freezing and from prolonged heat.
Alcohol Soluble — Soluble in ethanol and in polar solvents; limited water solubility. Pre-dissolve in alcohol, glycol or a solubiliser before addition.
TYPICAL USE LEVEL
No single published figure applies to every grade of this material. As a working rule, start water-phase actives at 0.5–2%, oil-phase actives at 1–5%, standardised or potent isolates at 0.05–0.5%, and supplier-diluted solutions at the percentage the technical data sheet specifies. Always confirm the exact level against the supplier TDS, your stability and compatibility testing, and the safety assessment for your finished product.
pH RANGE
formulation-dependent
ADD AT
As per the supplier technical data sheet
FUNCTIONS
Antioxidant
USED IN
Anti-ageing serums
STORAGE
Store in the original sealed container in a cool, dry place at 15–25 °C, away from direct sunlight and moisture. Re-seal immediately after weighing; many powders are hygroscopic.
Water Soluble — Water-soluble. Disperse into the water phase with stirring; avoid prolonged high heat where the material is heat-sensitive.
TYPICAL USE LEVEL
10–25% in antiperspirants where permitted
pH RANGE
3.5–4.5
ADD AT
Water phase, cool-down
FUNCTIONS
Perspiration reduction
USED IN
Body / deodorant / self-tan
STORAGE
Store in the original sealed container in a cool, dry place at 15–25 °C, away from direct sunlight and moisture. Re-seal immediately after weighing; many powders are hygroscopic.
PACK SIZES
50 g to 5 Kg
REGULATORY
Market-specific claims and active-ingredient rules may apply
Water Dispersible — Water-dispersible rather than truly soluble. Sprinkle into vigorously stirred water or pre-wet in glycerin to avoid lumping.
TYPICAL USE LEVEL
1–10%
pH RANGE
any
ADD AT
Dispersed phase
FUNCTIONS
Oil absorption; silky slip
USED IN
Deodorant, pressed powder, sunscreen, lotion
STORAGE
Store in the original sealed container in a cool, dry place at 15–25 °C, away from direct sunlight and moisture. Re-seal immediately after weighing; many powders are hygroscopic.
Water Dispersible — Water-dispersible rather than truly soluble. Sprinkle into vigorously stirred water or pre-wet in glycerin to avoid lumping.
TYPICAL USE LEVEL
No single published figure applies to every grade of this material. As a working rule, start water-phase actives at 0.5–2%, oil-phase actives at 1–5%, standardised or potent isolates at 0.05–0.5%, and supplier-diluted solutions at the percentage the technical data sheet specifies. Always confirm the exact level against the supplier TDS, your stability and compatibility testing, and the safety assessment for your finished product.
pH RANGE
formulation-dependent
ADD AT
As per the supplier technical data sheet
FUNCTIONS
Perspiration reduction
USED IN
Body / deodorant / self-tan
STORAGE
Store in the original sealed container in a cool, dry place at 15–25 °C, away from direct sunlight and moisture. Re-seal immediately after weighing; many powders are hygroscopic.
PACK SIZES
50 g to 5 Kg
REGULATORY
Market-specific claims and active-ingredient rules may apply
INCI Phyllanthus Emblica Fruit Extract · CAS not assigned
FAMILY
Botanical extract
ORIGIN
India / Ayurveda — Phyllanthus Emblica fruit
SUPPLY FORM
Powder / liquid extract; solvent system supplier-dependent
SOLUBILITY
Grade Dependent — Solubility is grade-dependent. Confirm the exact carrier system and dilution route on the supplier technical data sheet before formulating.
TYPICAL USE LEVEL
0.5–5% for liquid/glycolic extracts; 0.1–1% for dry powder extracts
pH RANGE
4.0–7.0
ADD AT
Water phase, cool-down
FUNCTIONS
Antioxidant; hair/scalp conditioning
USED IN
Skin and/or hair care
STORAGE
Store in a tightly closed container at 15–25 °C, away from direct sunlight. Protect from freezing and from prolonged heat.
PACK SIZES
50 g to 5 Kg
REGULATORY
Exact INCI, plant part, solvent and allergen profile verification
INCI Sesamum Indicum Seed Oil (and) Phyllanthus Emblica Fruit Extract · CAS 8008-74-0
FAMILY
Traditional infused oil (taila)
ORIGIN
India / Ayurveda — Sesame oil infused with amla
SUPPLY FORM
Liquid oil
SOLUBILITY
Oil Soluble — Oil-soluble. Add to the oil phase; will not disperse in water without a solubiliser or emulsifier.
TYPICAL USE LEVEL
No single published figure applies to every grade of this material. As a working rule, start water-phase actives at 0.5–2%, oil-phase actives at 1–5%, standardised or potent isolates at 0.05–0.5%, and supplier-diluted solutions at the percentage the technical data sheet specifies. Always confirm the exact level against the supplier TDS, your stability and compatibility testing, and the safety assessment for your finished product.
pH RANGE
formulation-dependent
ADD AT
As per the supplier technical data sheet
FUNCTIONS
Hair conditioning; antioxidant
USED IN
Hair oils, pre-wash treatments
STORAGE
Store in a tightly closed container at 15–25 °C, away from direct sunlight. Protect from freezing and from prolonged heat.
PACK SIZES
50 g to 5 Kg
REGULATORY
Exact INCI, plant part, solvent and allergen profile verification
Water Dispersible — Water-dispersible rather than truly soluble. Sprinkle into vigorously stirred water or pre-wet in glycerin to avoid lumping.
TYPICAL USE LEVEL
0.1–1.5%
pH RANGE
any
ADD AT
Water phase
FUNCTIONS
Viscosity; suspension; sensory
USED IN
Skin, hair, color cosmetics
STORAGE
Store in the original sealed container in a cool, dry place at 15–25 °C, away from direct sunlight and moisture. Re-seal immediately after weighing; many powders are hygroscopic.
Oil Soluble — Oil-soluble. Add to the oil phase; will not disperse in water without a solubiliser or emulsifier.
TYPICAL USE LEVEL
1–10%
pH RANGE
any
ADD AT
Oil phase / cool-down
FUNCTIONS
Slip; conditioning; water resistance / film
USED IN
Skin, hair, makeup
STORAGE
Store in the original sealed container in a cool, dry place at 15–25 °C, away from direct sunlight and moisture. Re-seal immediately after weighing; many powders are hygroscopic.
PACK SIZES
50 g to 5 Kg
REGULATORY
Environmental / regional restrictions review where relevant
How to read these entries. Use levels and pH ranges are typical formulation starting points for a cosmetic raw material, not approvals. A published INCI name does not by itself authorise use: confirm permitted status, maximum concentration, restrictions by product type, labelling and claim rules in every market you sell into, and give every finished product its own safety assessment. Entries marked with a regulatory flag carry a binding limit somewhere — the product page states which framework and what the limit is.
