70 cosmetic ingredients from Galactomyces Ferment Filtrate to Guggul Resin Extract. Every entry carries the INCI name, CAS number where one is assigned, solubility, typical use level, pH range, the phase to add it in, and the regulatory position — then links straight to the material.
Cold-chain material. Store refrigerated at 2–8 °C, protect from light and return to refrigeration immediately after use. Do not freeze unless the technical data sheet says otherwise.
PACK SIZES
50 g to 5 Kg
REGULATORY
Exact INCI and preservative system supplier-dependent
INCI Galactomyces Ferment Filtrate · CAS not assigned
FAMILY
Ferment filtrate
ORIGIN
Korea / Japan — Galactomyces culture
SUPPLY FORM
Liquid
SOLUBILITY
Water Soluble — Water-soluble. Disperse into the water phase with stirring; avoid prolonged high heat where the material is heat-sensitive.
TYPICAL USE LEVEL
1–10% of the supplied filtrate
pH RANGE
4.0–6.5
ADD AT
Water phase, cool-down
FUNCTIONS
Brightening and texture positioning
USED IN
Essences, toners
STORAGE
Cold-chain material. Store refrigerated at 2–8 °C, protect from light and return to refrigeration immediately after use. Do not freeze unless the technical data sheet says otherwise.
PACK SIZES
50 g to 5 Kg
REGULATORY
Exact INCI, organism, substrate and preservative system supplier-dependent
Water Soluble — Water-soluble. Disperse into the water phase with stirring; avoid prolonged high heat where the material is heat-sensitive.
TYPICAL USE LEVEL
0.5–5%
pH RANGE
4.0–7.0
ADD AT
Water phase
FUNCTIONS
Microbiome support / postbiotic / prebiotic positioning
USED IN
Skin, scalp, deodorant, sensitive-skin care
STORAGE
Store in the original sealed container in a cool, dry place at 15–25 °C, away from direct sunlight and moisture. Re-seal immediately after weighing; many powders are hygroscopic.
PACK SIZES
50 g to 5 Kg
REGULATORY
Microbiome claim substantiation and exact composition review
Water Soluble — Water-soluble. Disperse into the water phase with stirring; avoid prolonged high heat where the material is heat-sensitive.
TYPICAL USE LEVEL
No single published figure applies to every grade of this material. As a working rule, start water-phase actives at 0.5–2%, oil-phase actives at 1–5%, standardised or potent isolates at 0.05–0.5%, and supplier-diluted solutions at the percentage the technical data sheet specifies. Always confirm the exact level against the supplier TDS, your stability and compatibility testing, and the safety assessment for your finished product.
pH RANGE
formulation-dependent
ADD AT
As per the supplier technical data sheet
FUNCTIONS
NMF support; humectancy; conditioning
USED IN
Moisturizers, serums, hair/scalp
STORAGE
Store in the original sealed container in a cool, dry place at 15–25 °C, away from direct sunlight and moisture. Re-seal immediately after weighing; many powders are hygroscopic.
Global — Synthetic / nature-identical / botanical / biotech
SUPPLY FORM
Powder / liquid depending grade
SOLUBILITY
Water Soluble — Water-soluble. Disperse into the water phase with stirring; avoid prolonged high heat where the material is heat-sensitive.
TYPICAL USE LEVEL
No single published figure applies to every grade of this material. As a working rule, start water-phase actives at 0.5–2%, oil-phase actives at 1–5%, standardised or potent isolates at 0.05–0.5%, and supplier-diluted solutions at the percentage the technical data sheet specifies. Always confirm the exact level against the supplier TDS, your stability and compatibility testing, and the safety assessment for your finished product.
pH RANGE
formulation-dependent
ADD AT
As per the supplier technical data sheet
FUNCTIONS
Antioxidant; oxidative-stress support
USED IN
Serums, creams, masks
STORAGE
Store in a tightly closed container at 15–25 °C, away from direct sunlight. Protect from freezing and from prolonged heat.
INCI Gardenia Jasminoides Fruit Extract · CAS not assigned
FAMILY
Botanical extract
ORIGIN
China / TCM — Gardenia Jasminoides fruit
SUPPLY FORM
Powder / liquid extract; solvent system supplier-dependent
SOLUBILITY
Grade Dependent — Solubility is grade-dependent. Confirm the exact carrier system and dilution route on the supplier technical data sheet before formulating.
TYPICAL USE LEVEL
0.5–5% for liquid/glycolic extracts; 0.1–1% for dry powder extracts
pH RANGE
4.0–7.0
ADD AT
Water phase, cool-down
FUNCTIONS
Antioxidant / colorant-adjacent
USED IN
Skin and/or hair care
STORAGE
Store in a tightly closed container at 15–25 °C, away from direct sunlight. Protect from freezing and from prolonged heat.
PACK SIZES
50 g to 5 Kg
REGULATORY
Exact INCI, plant part, solvent and allergen profile verification
Water Soluble — Water-soluble. Disperse into the water phase with stirring; avoid prolonged high heat where the material is heat-sensitive.
TYPICAL USE LEVEL
0.05–0.5% (suspension); up to 1% for firm gels
pH RANGE
any
ADD AT
Water phase, hydrate hot then cool
FUNCTIONS
Suspension; clear gelling
USED IN
Suspending gels, essence textures, jelly formats
STORAGE
Cold-chain material. Store refrigerated at 2–8 °C, protect from light and return to refrigeration immediately after use. Do not freeze unless the technical data sheet says otherwise.
Store in a cool, dark place in a well-filled, tightly closed container. Minimise headspace and light exposure to limit oxidation; refrigeration extends shelf life for polyunsaturated oils.
PACK SIZES
50 g to 5 Kg
REGULATORY
Fragrance allergen, phototoxicity, sensitization and use-level review essential
Store in a cool, dark place in a well-filled, tightly closed container. Minimise headspace and light exposure to limit oxidation; refrigeration extends shelf life for polyunsaturated oils.
PACK SIZES
10 g to 1 Kg
REGULATORY
Fragrance allergen, phototoxicity, sensitization and use-level review essential
Store in a cool, dark place in a well-filled, tightly closed container. Minimise headspace and light exposure to limit oxidation; refrigeration extends shelf life for polyunsaturated oils.
PACK SIZES
50 g to 5 Kg
REGULATORY
Fragrance allergen, phototoxicity, sensitization and use-level review essential
INCI Zingiber Officinale Root Water · CAS not assigned
FAMILY
Hydrosol / aromatic water
ORIGIN
India — Ginger root
SUPPLY FORM
Aromatic water
SOLUBILITY
Water Soluble — Water-soluble. Disperse into the water phase with stirring; avoid prolonged high heat where the material is heat-sensitive.
TYPICAL USE LEVEL
5–100% as part or all of the water phase
pH RANGE
3.5–6.0
ADD AT
Water phase (preserve adequately)
FUNCTIONS
Warming positioning; toning
USED IN
Body mists, scalp products
STORAGE
Store in the original sealed container in a cool, dry place at 15–25 °C, away from direct sunlight and moisture. Re-seal immediately after weighing; many powders are hygroscopic.
PACK SIZES
50 g to 5 Kg
REGULATORY
Exact INCI, plant part, solvent and allergen profile verification
INCI Ginkgo Biloba Leaf Extract · CAS not assigned
FAMILY
Botanical extract
ORIGIN
China / TCM — Ginkgo Biloba leaf
SUPPLY FORM
Powder / liquid extract; solvent system supplier-dependent
SOLUBILITY
Grade Dependent — Solubility is grade-dependent. Confirm the exact carrier system and dilution route on the supplier technical data sheet before formulating.
TYPICAL USE LEVEL
0.5–5% for liquid/glycolic extracts; 0.1–1% for dry powder extracts
pH RANGE
4.0–7.0
ADD AT
Water phase, cool-down
FUNCTIONS
Antioxidant / microcirculation
USED IN
Skin and/or hair care
STORAGE
Store in a tightly closed container at 15–25 °C, away from direct sunlight. Protect from freezing and from prolonged heat.
PACK SIZES
50 g to 5 Kg
REGULATORY
Exact INCI, plant part, solvent and allergen profile verification
INCI Ginkgo Biloba Leaf Extract (Standardised) · CAS not assigned
FAMILY
Botanical extract / standardised
ORIGIN
China / TCM — Ginkgo Biloba leaf
SUPPLY FORM
Powder
SOLUBILITY
Grade Dependent — Solubility is grade-dependent. Confirm the exact carrier system and dilution route on the supplier technical data sheet before formulating.
TYPICAL USE LEVEL
0.5–5% for liquid/glycolic extracts; 0.1–1% for dry powder extracts
pH RANGE
4.0–7.0
ADD AT
Water phase, cool-down
FUNCTIONS
Antioxidant; microcirculation positioning
USED IN
Eye creams, body-firming products
STORAGE
Store in the original sealed container in a cool, dry place at 15–25 °C, away from direct sunlight and moisture. Re-seal immediately after weighing; many powders are hygroscopic.
PACK SIZES
50 g to 5 Kg
REGULATORY
Exact INCI, plant part, solvent and allergen profile verification
INCI Panax Ginseng Fruit Extract · CAS not assigned
FAMILY
Botanical extract
ORIGIN
Korea — Panax Ginseng fruit
SUPPLY FORM
Liquid / powder extract
SOLUBILITY
Grade Dependent — Solubility is grade-dependent. Confirm the exact carrier system and dilution route on the supplier technical data sheet before formulating.
TYPICAL USE LEVEL
0.5–5% for liquid/glycolic extracts; 0.1–1% for dry powder extracts
pH RANGE
4.0–7.0
ADD AT
Water phase, cool-down
FUNCTIONS
Antioxidant; energising positioning
USED IN
Anti-ageing serums, hanbang lines
STORAGE
Store in a tightly closed container at 15–25 °C, away from direct sunlight. Protect from freezing and from prolonged heat.
PACK SIZES
50 g to 5 Kg
REGULATORY
Exact INCI, plant part, solvent and allergen profile verification
INCI Lactobacillus/Panax Ginseng Root Ferment Filtrate · CAS not assigned
FAMILY
Ferment filtrate
ORIGIN
Korea — Fermented ginseng root
SUPPLY FORM
Liquid
SOLUBILITY
Water Soluble — Water-soluble. Disperse into the water phase with stirring; avoid prolonged high heat where the material is heat-sensitive.
TYPICAL USE LEVEL
1–10% of the supplied filtrate
pH RANGE
4.0–6.5
ADD AT
Water phase, cool-down
FUNCTIONS
Antioxidant; bioconverted ginsenosides
USED IN
Hanbang ampoules, premium essences
STORAGE
Cold-chain material. Store refrigerated at 2–8 °C, protect from light and return to refrigeration immediately after use. Do not freeze unless the technical data sheet says otherwise.
PACK SIZES
50 g to 5 Kg
REGULATORY
Exact INCI, organism, substrate and preservative system supplier-dependent
INCI Panax Ginseng Root Extract · CAS not assigned
FAMILY
Botanical extract
ORIGIN
Global — Panax Ginseng root
SUPPLY FORM
Powder / liquid extract; solvent system supplier-dependent
SOLUBILITY
Grade Dependent — Solubility is grade-dependent. Confirm the exact carrier system and dilution route on the supplier technical data sheet before formulating.
TYPICAL USE LEVEL
0.5–5% for liquid/glycolic extracts; 0.1–1% for dry powder extracts
pH RANGE
4.0–7.0
ADD AT
Water phase, cool-down
FUNCTIONS
Antioxidant; firming
USED IN
Skin and/or hair care
STORAGE
Store in a tightly closed container at 15–25 °C, away from direct sunlight. Protect from freezing and from prolonged heat.
PACK SIZES
50 g to 5 Kg
REGULATORY
Exact INCI, plant part, solvent and allergen profile verification
INCI Supplier-specific plant extracellular vesicles · CAS not assigned
FAMILY
Plant EV
ORIGIN
Global — Biotech / metabolite / plant extracellular vesicle
SUPPLY FORM
Powder / stabilized dispersion
SOLUBILITY
Grade Dependent — Solubility is grade-dependent. Confirm the exact carrier system and dilution route on the supplier technical data sheet before formulating.
TYPICAL USE LEVEL
1–5% of the supplied preparation (supplier-specified)
pH RANGE
5.0–7.0
ADD AT
Cool-down below 35 °C
FUNCTIONS
Emerging regenerative technology
USED IN
High-end serums / R&D formulations
STORAGE
Cold-chain material. Store refrigerated at 2–8 °C, protect from light and return to refrigeration immediately after use. Do not freeze unless the technical data sheet says otherwise.
PACK SIZES
10 g to 1 Kg
REGULATORY
High diligence: exact identity, claims, safety, INCI and jurisdiction-specific review
Water Dispersible — Water-dispersible rather than truly soluble. Sprinkle into vigorously stirred water or pre-wet in glycerin to avoid lumping.
TYPICAL USE LEVEL
No single published figure applies to every grade of this material. As a working rule, start water-phase actives at 0.5–2%, oil-phase actives at 1–5%, standardised or potent isolates at 0.05–0.5%, and supplier-diluted solutions at the percentage the technical data sheet specifies. Always confirm the exact level against the supplier TDS, your stability and compatibility testing, and the safety assessment for your finished product.
pH RANGE
formulation-dependent
ADD AT
As per the supplier technical data sheet
FUNCTIONS
Antioxidant; ageing positioning
USED IN
Premium ampoules, hanbang serums
STORAGE
Store in the original sealed container in a cool, dry place at 15–25 °C, away from direct sunlight and moisture. Re-seal immediately after weighing; many powders are hygroscopic.
Water Soluble — Water-soluble. Disperse into the water phase with stirring; avoid prolonged high heat where the material is heat-sensitive.
TYPICAL USE LEVEL
0.5–5%
pH RANGE
4.0–7.0
ADD AT
Water phase
FUNCTIONS
Microbiome support / postbiotic / prebiotic positioning
USED IN
Skin, scalp, deodorant, sensitive-skin care
STORAGE
Store in the original sealed container in a cool, dry place at 15–25 °C, away from direct sunlight and moisture. Re-seal immediately after weighing; many powders are hygroscopic.
PACK SIZES
50 g to 5 Kg
REGULATORY
Microbiome claim substantiation and exact composition review
Global — Synthetic / nature-identical / botanical / biotech
SUPPLY FORM
Powder / liquid depending grade
SOLUBILITY
Water Soluble — Water-soluble. Disperse into the water phase with stirring; avoid prolonged high heat where the material is heat-sensitive.
TYPICAL USE LEVEL
No single published figure applies to every grade of this material. As a working rule, start water-phase actives at 0.5–2%, oil-phase actives at 1–5%, standardised or potent isolates at 0.05–0.5%, and supplier-diluted solutions at the percentage the technical data sheet specifies. Always confirm the exact level against the supplier TDS, your stability and compatibility testing, and the safety assessment for your finished product.
pH RANGE
formulation-dependent
ADD AT
As per the supplier technical data sheet
FUNCTIONS
Resurfacing / keratolytic / texture support depending active
USED IN
Peels, serums, toners, masks
STORAGE
Store in a tightly closed container at 15–25 °C, away from direct sunlight. Protect from freezing and from prolonged heat.
INCI Gluconolactone (and) Sodium Benzoate · CAS 90-80-2
FAMILY
PHA blend
ORIGIN
Global — Fermentation-derived
SUPPLY FORM
Liquid
SOLUBILITY
Water Soluble — Water-soluble. Disperse into the water phase with stirring; avoid prolonged high heat where the material is heat-sensitive.
TYPICAL USE LEVEL
No single published figure applies to every grade of this material. As a working rule, start water-phase actives at 0.5–2%, oil-phase actives at 1–5%, standardised or potent isolates at 0.05–0.5%, and supplier-diluted solutions at the percentage the technical data sheet specifies. Always confirm the exact level against the supplier TDS, your stability and compatibility testing, and the safety assessment for your finished product.
Water Soluble — Water-soluble. Disperse into the water phase with stirring; avoid prolonged high heat where the material is heat-sensitive.
TYPICAL USE LEVEL
No single published figure applies to every grade of this material. As a working rule, start water-phase actives at 0.5–2%, oil-phase actives at 1–5%, standardised or potent isolates at 0.05–0.5%, and supplier-diluted solutions at the percentage the technical data sheet specifies. Always confirm the exact level against the supplier TDS, your stability and compatibility testing, and the safety assessment for your finished product.
pH RANGE
formulation-dependent
ADD AT
As per the supplier technical data sheet
FUNCTIONS
NMF support; humectancy; conditioning
USED IN
Moisturizers, serums, hair/scalp
STORAGE
Store in the original sealed container in a cool, dry place at 15–25 °C, away from direct sunlight and moisture. Re-seal immediately after weighing; many powders are hygroscopic.
Global — Plant / biotech / animal-free grades available
SUPPLY FORM
Powder / lipid dispersion / oil
SOLUBILITY
Water Dispersible — Water-dispersible rather than truly soluble. Sprinkle into vigorously stirred water or pre-wet in glycerin to avoid lumping.
TYPICAL USE LEVEL
1–15%
pH RANGE
any
ADD AT
Oil phase
FUNCTIONS
Barrier lipid replenishment; conditioning
USED IN
Barrier creams, serums, scalp
STORAGE
Store in a cool, dark place in a well-filled, tightly closed container. Minimise headspace and light exposure to limit oxidation; refrigeration extends shelf life for polyunsaturated oils.
Water Soluble — Water-soluble. Disperse into the water phase with stirring; avoid prolonged high heat where the material is heat-sensitive.
TYPICAL USE LEVEL
0.1–2%
pH RANGE
4.0–7.0
ADD AT
Water phase
FUNCTIONS
NMF support; humectancy; conditioning
USED IN
Moisturizers, serums, hair/scalp
STORAGE
Store in the original sealed container in a cool, dry place at 15–25 °C, away from direct sunlight and moisture. Re-seal immediately after weighing; many powders are hygroscopic.
Global — Synthetic / nature-identical / botanical / biotech
SUPPLY FORM
Powder / liquid depending grade
SOLUBILITY
Water Soluble — Water-soluble. Disperse into the water phase with stirring; avoid prolonged high heat where the material is heat-sensitive.
TYPICAL USE LEVEL
0.1–2%
pH RANGE
4.0–6.0
ADD AT
Water phase, cool-down, antioxidant support
FUNCTIONS
Antioxidant; oxidative-stress support
USED IN
Serums, creams, masks
STORAGE
Cold-chain material. Store refrigerated at 2–8 °C, protect from light and return to refrigeration immediately after use. Do not freeze unless the technical data sheet says otherwise.
Oil Soluble — Oil-soluble. Add to the oil phase; will not disperse in water without a solubiliser or emulsifier.
TYPICAL USE LEVEL
1–15%
pH RANGE
any
ADD AT
Oil phase
FUNCTIONS
Structuring; lipid nanoparticle formation
USED IN
SLN/NLC systems, sticks, sun care
STORAGE
Store in a cool, dark place in a well-filled, tightly closed container. Minimise headspace and light exposure to limit oxidation; refrigeration extends shelf life for polyunsaturated oils.
Grade Dependent — Solubility is grade-dependent. Confirm the exact carrier system and dilution route on the supplier technical data sheet before formulating.
TYPICAL USE LEVEL
No single published figure applies to every grade of this material. As a working rule, start water-phase actives at 0.5–2%, oil-phase actives at 1–5%, standardised or potent isolates at 0.05–0.5%, and supplier-diluted solutions at the percentage the technical data sheet specifies. Always confirm the exact level against the supplier TDS, your stability and compatibility testing, and the safety assessment for your finished product.
pH RANGE
formulation-dependent
ADD AT
As per the supplier technical data sheet
FUNCTIONS
Antimicrobial support; emulsification
USED IN
Natural-positioned skincare, deodorant
STORAGE
Store in a tightly closed container at 15–25 °C, away from direct sunlight. Protect from freezing and from prolonged heat.
Water Soluble — Water-soluble. Disperse into the water phase with stirring; avoid prolonged high heat where the material is heat-sensitive.
TYPICAL USE LEVEL
0.1–2%
pH RANGE
4.0–7.0
ADD AT
Water phase
FUNCTIONS
NMF support; humectancy; conditioning
USED IN
Moisturizers, serums, hair/scalp
STORAGE
Store in the original sealed container in a cool, dry place at 15–25 °C, away from direct sunlight and moisture. Re-seal immediately after weighing; many powders are hygroscopic.
Global — Synthetic / nature-identical / botanical / biotech
SUPPLY FORM
Powder / liquid depending grade
SOLUBILITY
Oil Soluble — Oil-soluble. Add to the oil phase; will not disperse in water without a solubiliser or emulsifier.
TYPICAL USE LEVEL
No single published figure applies to every grade of this material. As a working rule, start water-phase actives at 0.5–2%, oil-phase actives at 1–5%, standardised or potent isolates at 0.05–0.5%, and supplier-diluted solutions at the percentage the technical data sheet specifies. Always confirm the exact level against the supplier TDS, your stability and compatibility testing, and the safety assessment for your finished product.
pH RANGE
formulation-dependent
ADD AT
As per the supplier technical data sheet
FUNCTIONS
Soothing; antioxidant
USED IN
Skin care
STORAGE
Store in a tightly closed container at 15–25 °C, away from direct sunlight. Protect from freezing and from prolonged heat.
INCI Lycium Barbarum Fruit Extract (Standardised Polysaccharides) · CAS not assigned
FAMILY
Botanical extract / standardised
ORIGIN
China / TCM — Lycium Barbarum fruit
SUPPLY FORM
Powder / liquid extract
SOLUBILITY
Grade Dependent — Solubility is grade-dependent. Confirm the exact carrier system and dilution route on the supplier technical data sheet before formulating.
TYPICAL USE LEVEL
0.5–5% for liquid/glycolic extracts; 0.1–1% for dry powder extracts
pH RANGE
4.0–7.0
ADD AT
Water phase, cool-down
FUNCTIONS
Antioxidant; hydration
USED IN
Serums, masks
STORAGE
Store in a tightly closed container at 15–25 °C, away from direct sunlight. Protect from freezing and from prolonged heat.
PACK SIZES
50 g to 5 Kg
REGULATORY
Exact INCI, plant part, solvent and allergen profile verification
INCI Lactobacillus/Lycium Barbarum Fruit Ferment Filtrate · CAS not assigned
FAMILY
Ferment filtrate
ORIGIN
China — Fermented goji berry
SUPPLY FORM
Liquid
SOLUBILITY
Water Soluble — Water-soluble. Disperse into the water phase with stirring; avoid prolonged high heat where the material is heat-sensitive.
TYPICAL USE LEVEL
1–10% of the supplied filtrate
pH RANGE
4.0–6.5
ADD AT
Water phase, cool-down
FUNCTIONS
Antioxidant; hydration
USED IN
TCM-positioned essences
STORAGE
Cold-chain material. Store refrigerated at 2–8 °C, protect from light and return to refrigeration immediately after use. Do not freeze unless the technical data sheet says otherwise.
PACK SIZES
50 g to 5 Kg
REGULATORY
Exact INCI, organism, substrate and preservative system supplier-dependent
INCI Lycium Barbarum Fruit Extract · CAS not assigned
FAMILY
Botanical extract
ORIGIN
Global — Lycium Barbarum fruit
SUPPLY FORM
Powder / liquid extract; solvent system supplier-dependent
SOLUBILITY
Grade Dependent — Solubility is grade-dependent. Confirm the exact carrier system and dilution route on the supplier technical data sheet before formulating.
TYPICAL USE LEVEL
0.5–5% for liquid/glycolic extracts; 0.1–1% for dry powder extracts
pH RANGE
4.0–7.0
ADD AT
Water phase, cool-down
FUNCTIONS
Antioxidant
USED IN
Skin and/or hair care
STORAGE
Store in a tightly closed container at 15–25 °C, away from direct sunlight. Protect from freezing and from prolonged heat.
PACK SIZES
50 g to 5 Kg
REGULATORY
Exact INCI, plant part, solvent and allergen profile verification
INCI Tribulus Terrestris Fruit Extract · CAS not assigned
FAMILY
Botanical extract
ORIGIN
India / Ayurveda — Tribulus Terrestris fruit
SUPPLY FORM
Powder / liquid extract
SOLUBILITY
Grade Dependent — Solubility is grade-dependent. Confirm the exact carrier system and dilution route on the supplier technical data sheet before formulating.
TYPICAL USE LEVEL
0.5–5% for liquid/glycolic extracts; 0.1–1% for dry powder extracts
pH RANGE
4.0–7.0
ADD AT
Water phase, cool-down
FUNCTIONS
Traditional tonic positioning
USED IN
Scalp serums, traditional formats
STORAGE
Store in a tightly closed container at 15–25 °C, away from direct sunlight. Protect from freezing and from prolonged heat.
PACK SIZES
50 g to 5 Kg
REGULATORY
Exact INCI, plant part, solvent and allergen profile verification
INCI Centella Asiatica Whole Plant Extract · CAS not assigned
FAMILY
Botanical extract
ORIGIN
India / Ayurveda — Centella Asiatica whole plant
SUPPLY FORM
Powder / liquid extract; solvent system supplier-dependent
SOLUBILITY
Grade Dependent — Solubility is grade-dependent. Confirm the exact carrier system and dilution route on the supplier technical data sheet before formulating.
TYPICAL USE LEVEL
0.5–5% for liquid/glycolic extracts; 0.1–1% for dry powder extracts
pH RANGE
4.0–7.0
ADD AT
Water phase, cool-down
FUNCTIONS
Skin repair
USED IN
Skin and/or hair care
STORAGE
Store in a tightly closed container at 15–25 °C, away from direct sunlight. Protect from freezing and from prolonged heat.
PACK SIZES
50 g to 5 Kg
REGULATORY
Exact INCI, plant part, solvent and allergen profile verification
Water Dispersible — Water-dispersible rather than truly soluble. Sprinkle into vigorously stirred water or pre-wet in glycerin to avoid lumping.
TYPICAL USE LEVEL
No single published figure applies to every grade of this material. As a working rule, start water-phase actives at 0.5–2%, oil-phase actives at 1–5%, standardised or potent isolates at 0.05–0.5%, and supplier-diluted solutions at the percentage the technical data sheet specifies. Always confirm the exact level against the supplier TDS, your stability and compatibility testing, and the safety assessment for your finished product.
pH RANGE
formulation-dependent
ADD AT
As per the supplier technical data sheet
FUNCTIONS
Soothing; traditional repair positioning
USED IN
Masks, powders, traditional formats
STORAGE
Store in the original sealed container in a cool, dry place at 15–25 °C, away from direct sunlight and moisture. Re-seal immediately after weighing; many powders are hygroscopic.
PACK SIZES
50 g to 5 Kg
REGULATORY
Exact INCI, plant part, solvent and allergen profile verification
INCI Lycium Barbarum Fruit Extract · CAS not assigned
FAMILY
Botanical extract
ORIGIN
China / TCM — Lycium Barbarum fruit
SUPPLY FORM
Powder / liquid extract; solvent system supplier-dependent
SOLUBILITY
Grade Dependent — Solubility is grade-dependent. Confirm the exact carrier system and dilution route on the supplier technical data sheet before formulating.
TYPICAL USE LEVEL
0.5–5% for liquid/glycolic extracts; 0.1–1% for dry powder extracts
pH RANGE
4.0–7.0
ADD AT
Water phase, cool-down
FUNCTIONS
Antioxidant
USED IN
Skin and/or hair care
STORAGE
Store in a tightly closed container at 15–25 °C, away from direct sunlight. Protect from freezing and from prolonged heat.
PACK SIZES
50 g to 5 Kg
REGULATORY
Exact INCI, plant part, solvent and allergen profile verification
Grade Dependent — Solubility is grade-dependent. Confirm the exact carrier system and dilution route on the supplier technical data sheet before formulating.
TYPICAL USE LEVEL
0.5–5% liquid; 0.1–1% powder
pH RANGE
4.0–7.0
ADD AT
Water phase, cool-down
FUNCTIONS
Conditioning; hydration; antioxidant / film-forming depending material
USED IN
Skin, masks, hair, body
STORAGE
Store in the original sealed container in a cool, dry place at 15–25 °C, away from direct sunlight and moisture. Re-seal immediately after weighing; many powders are hygroscopic.
INCI Cicer Arietinum Seed Powder · CAS not assigned
FAMILY
Plant powder
ORIGIN
India — Chickpea
SUPPLY FORM
Fine flour
SOLUBILITY
Grade Dependent — Solubility is grade-dependent. Confirm the exact carrier system and dilution route on the supplier technical data sheet before formulating.
TYPICAL USE LEVEL
No single published figure applies to every grade of this material. As a working rule, start water-phase actives at 0.5–2%, oil-phase actives at 1–5%, standardised or potent isolates at 0.05–0.5%, and supplier-diluted solutions at the percentage the technical data sheet specifies. Always confirm the exact level against the supplier TDS, your stability and compatibility testing, and the safety assessment for your finished product.
pH RANGE
formulation-dependent
ADD AT
As per the supplier technical data sheet
FUNCTIONS
Gentle cleansing; oil absorption
USED IN
Ubtan, powder cleansers, masks
STORAGE
Store in the original sealed container in a cool, dry place at 15–25 °C, away from direct sunlight and moisture. Re-seal immediately after weighing; many powders are hygroscopic.
PACK SIZES
50 g to 5 Kg
REGULATORY
Exact INCI, plant part, solvent and allergen profile verification
INCI Vitis Vinifera Seed Extract · CAS not assigned
FAMILY
Botanical extract
ORIGIN
Global — Vitis Vinifera seed
SUPPLY FORM
Powder / liquid extract; solvent system supplier-dependent
SOLUBILITY
Grade Dependent — Solubility is grade-dependent. Confirm the exact carrier system and dilution route on the supplier technical data sheet before formulating.
TYPICAL USE LEVEL
0.5–5% for liquid/glycolic extracts; 0.1–1% for dry powder extracts
pH RANGE
4.0–7.0
ADD AT
Water phase, cool-down
FUNCTIONS
Antioxidant
USED IN
Skin and/or hair care
STORAGE
Store in a tightly closed container at 15–25 °C, away from direct sunlight. Protect from freezing and from prolonged heat.
PACK SIZES
50 g to 5 Kg
REGULATORY
Exact INCI, plant part, solvent and allergen profile verification
INCI Vitis Vinifera Skin Extract · CAS not assigned
FAMILY
Botanical extract
ORIGIN
Global — Vitis Vinifera skin
SUPPLY FORM
Powder / liquid extract; solvent system supplier-dependent
SOLUBILITY
Grade Dependent — Solubility is grade-dependent. Confirm the exact carrier system and dilution route on the supplier technical data sheet before formulating.
TYPICAL USE LEVEL
0.5–5% for liquid/glycolic extracts; 0.1–1% for dry powder extracts
pH RANGE
4.0–7.0
ADD AT
Water phase, cool-down
FUNCTIONS
Polyphenol antioxidant
USED IN
Skin and/or hair care
STORAGE
Store in a tightly closed container at 15–25 °C, away from direct sunlight. Protect from freezing and from prolonged heat.
PACK SIZES
50 g to 5 Kg
REGULATORY
Exact INCI, plant part, solvent and allergen profile verification
Store in a cool, dark place in a well-filled, tightly closed container. Minimise headspace and light exposure to limit oxidation; refrigeration extends shelf life for polyunsaturated oils.
PACK SIZES
50 g to 5 Kg
REGULATORY
Fragrance allergen, phototoxicity, sensitization and use-level review essential
Oil Soluble — Oil-soluble. Add to the oil phase; will not disperse in water without a solubiliser or emulsifier.
TYPICAL USE LEVEL
1–20% (up to 100% as a neat oil)
pH RANGE
any
ADD AT
Oil phase
FUNCTIONS
Light emolliency
USED IN
Massage oils, light facial oils
STORAGE
Store in a cool, dark place in a well-filled, tightly closed container. Minimise headspace and light exposure to limit oxidation; refrigeration extends shelf life for polyunsaturated oils.
Dispersion Only — Practically insoluble in water and oil. Used as a dispersed solid; requires shear, a wetting agent and an anti-settling system.
TYPICAL USE LEVEL
0.1–15% depending on shade and format
pH RANGE
any
ADD AT
Dispersed / grind phase
FUNCTIONS
Color / coverage / optical effect
USED IN
Makeup, tinted skincare, hair color where applicable
STORAGE
Store in the original sealed container in a cool, dry place at 15–25 °C, away from direct sunlight and moisture. Re-seal immediately after weighing; many powders are hygroscopic.
PACK SIZES
50 g to 5 Kg
REGULATORY
Color additives are tightly market- and application-specific; certification requirements may apply
Grade Dependent — Solubility is grade-dependent. Confirm the exact carrier system and dilution route on the supplier technical data sheet before formulating.
TYPICAL USE LEVEL
No single published figure applies to every grade of this material. As a working rule, start water-phase actives at 0.5–2%, oil-phase actives at 1–5%, standardised or potent isolates at 0.05–0.5%, and supplier-diluted solutions at the percentage the technical data sheet specifies. Always confirm the exact level against the supplier TDS, your stability and compatibility testing, and the safety assessment for your finished product.
pH RANGE
formulation-dependent
ADD AT
As per the supplier technical data sheet
FUNCTIONS
Gentle cleansing; mild exfoliation
USED IN
Ubtan, powder cleansers, masks
STORAGE
Store in the original sealed container in a cool, dry place at 15–25 °C, away from direct sunlight and moisture. Re-seal immediately after weighing; many powders are hygroscopic.
PACK SIZES
50 g to 5 Kg
REGULATORY
Exact INCI, plant part, solvent and allergen profile verification
INCI Camellia Sinensis Leaf Extract · CAS not assigned
FAMILY
Botanical extract
ORIGIN
Global — Synthetic / nature-identical / botanical / biotech
SUPPLY FORM
Powder / liquid depending grade
SOLUBILITY
Grade Dependent — Solubility is grade-dependent. Confirm the exact carrier system and dilution route on the supplier technical data sheet before formulating.
TYPICAL USE LEVEL
0.5–5% for liquid/glycolic extracts; 0.1–1% for dry powder extracts
pH RANGE
4.0–7.0
ADD AT
Water phase, cool-down
FUNCTIONS
Antioxidant / scalp
USED IN
Scalp serums, tonics, shampoos, conditioners
STORAGE
Store in a tightly closed container at 15–25 °C, away from direct sunlight. Protect from freezing and from prolonged heat.
INCI Camellia Sinensis Leaf Extract (Standardised Catechins) · CAS not assigned
FAMILY
Botanical extract / standardised
ORIGIN
Korea — Camellia Sinensis leaf
SUPPLY FORM
Powder / liquid extract
SOLUBILITY
Grade Dependent — Solubility is grade-dependent. Confirm the exact carrier system and dilution route on the supplier technical data sheet before formulating.
TYPICAL USE LEVEL
0.5–5% for liquid/glycolic extracts; 0.1–1% for dry powder extracts
pH RANGE
4.0–7.0
ADD AT
Water phase, cool-down
FUNCTIONS
Antioxidant; sebum positioning
USED IN
Toners, serums, masks
STORAGE
Store in a tightly closed container at 15–25 °C, away from direct sunlight. Protect from freezing and from prolonged heat.
PACK SIZES
50 g to 5 Kg
REGULATORY
Exact INCI, plant part, solvent and allergen profile verification
INCI Lactobacillus/Camellia Sinensis Leaf Ferment · CAS not assigned
FAMILY
Ferment filtrate
ORIGIN
Korea — Fermented green tea leaf
SUPPLY FORM
Liquid
SOLUBILITY
Water Soluble — Water-soluble. Disperse into the water phase with stirring; avoid prolonged high heat where the material is heat-sensitive.
TYPICAL USE LEVEL
1–10% of the supplied filtrate
pH RANGE
4.0–6.5
ADD AT
Water phase, cool-down
FUNCTIONS
Antioxidant; sebum positioning
USED IN
Essences, toners
STORAGE
Cold-chain material. Store refrigerated at 2–8 °C, protect from light and return to refrigeration immediately after use. Do not freeze unless the technical data sheet says otherwise.
PACK SIZES
50 g to 5 Kg
REGULATORY
Exact INCI, organism, substrate and preservative system supplier-dependent
INCI Camellia Sinensis Leaf Water · CAS not assigned
FAMILY
Hydrosol / aromatic water
ORIGIN
Japan / India — Green tea leaf
SUPPLY FORM
Aromatic water
SOLUBILITY
Water Soluble — Water-soluble. Disperse into the water phase with stirring; avoid prolonged high heat where the material is heat-sensitive.
TYPICAL USE LEVEL
5–100% as part or all of the water phase
pH RANGE
3.5–6.0
ADD AT
Water phase (preserve adequately)
FUNCTIONS
Toning; antioxidant positioning
USED IN
Toners, mists
STORAGE
Store in the original sealed container in a cool, dry place at 15–25 °C, away from direct sunlight and moisture. Re-seal immediately after weighing; many powders are hygroscopic.
PACK SIZES
50 g to 5 Kg
REGULATORY
Exact INCI, plant part, solvent and allergen profile verification
INCI Camellia Sinensis Leaf Extract · CAS not assigned
FAMILY
Botanical extract
ORIGIN
Global — Camellia Sinensis leaf
SUPPLY FORM
Powder / liquid extract; solvent system supplier-dependent
SOLUBILITY
Grade Dependent — Solubility is grade-dependent. Confirm the exact carrier system and dilution route on the supplier technical data sheet before formulating.
TYPICAL USE LEVEL
0.5–5% for liquid/glycolic extracts; 0.1–1% for dry powder extracts
pH RANGE
4.0–7.0
ADD AT
Water phase, cool-down
FUNCTIONS
Antioxidant; soothing
USED IN
Skin and/or hair care
STORAGE
Store in a tightly closed container at 15–25 °C, away from direct sunlight. Protect from freezing and from prolonged heat.
PACK SIZES
50 g to 5 Kg
REGULATORY
Exact INCI, plant part, solvent and allergen profile verification
INCI Supplier-specific plant extracellular vesicles · CAS not assigned
FAMILY
Plant EV
ORIGIN
Global — Biotech / metabolite / plant extracellular vesicle
SUPPLY FORM
Powder / stabilized dispersion
SOLUBILITY
Grade Dependent — Solubility is grade-dependent. Confirm the exact carrier system and dilution route on the supplier technical data sheet before formulating.
TYPICAL USE LEVEL
1–5% of the supplied preparation (supplier-specified)
pH RANGE
5.0–7.0
ADD AT
Cool-down below 35 °C
FUNCTIONS
Emerging regenerative technology
USED IN
High-end serums / R&D formulations
STORAGE
Cold-chain material. Store refrigerated at 2–8 °C, protect from light and return to refrigeration immediately after use. Do not freeze unless the technical data sheet says otherwise.
PACK SIZES
10 g to 1 Kg
REGULATORY
High diligence: exact identity, claims, safety, INCI and jurisdiction-specific review
Water Dispersible — Water-dispersible rather than truly soluble. Sprinkle into vigorously stirred water or pre-wet in glycerin to avoid lumping.
TYPICAL USE LEVEL
0.1–1.5%
pH RANGE
any
ADD AT
Water phase
FUNCTIONS
Viscosity; suspension; sensory
USED IN
Skin, hair, color cosmetics
STORAGE
Store in the original sealed container in a cool, dry place at 15–25 °C, away from direct sunlight and moisture. Re-seal immediately after weighing; many powders are hygroscopic.
INCI Tinospora Cordifolia Stem Extract · CAS not assigned
FAMILY
Botanical extract
ORIGIN
India / Ayurveda — Tinospora Cordifolia stem
SUPPLY FORM
Powder / liquid extract; solvent system supplier-dependent
SOLUBILITY
Grade Dependent — Solubility is grade-dependent. Confirm the exact carrier system and dilution route on the supplier technical data sheet before formulating.
TYPICAL USE LEVEL
0.5–5% for liquid/glycolic extracts; 0.1–1% for dry powder extracts
pH RANGE
4.0–7.0
ADD AT
Water phase, cool-down
FUNCTIONS
Traditional soothing
USED IN
Skin and/or hair care
STORAGE
Store in a tightly closed container at 15–25 °C, away from direct sunlight. Protect from freezing and from prolonged heat.
PACK SIZES
50 g to 5 Kg
REGULATORY
Exact INCI, plant part, solvent and allergen profile verification
INCI Commiphora Mukul Resin Extract · CAS not assigned
FAMILY
Resin extract
ORIGIN
India / Ayurveda — Commiphora Mukul resin
SUPPLY FORM
Powder / liquid extract
SOLUBILITY
Water Soluble — Water-soluble. Disperse into the water phase with stirring; avoid prolonged high heat where the material is heat-sensitive.
TYPICAL USE LEVEL
No single published figure applies to every grade of this material. As a working rule, start water-phase actives at 0.5–2%, oil-phase actives at 1–5%, standardised or potent isolates at 0.05–0.5%, and supplier-diluted solutions at the percentage the technical data sheet specifies. Always confirm the exact level against the supplier TDS, your stability and compatibility testing, and the safety assessment for your finished product.
pH RANGE
formulation-dependent
ADD AT
As per the supplier technical data sheet
FUNCTIONS
Traditional positioning; antioxidant
USED IN
Anti-ageing oils, traditional formats
STORAGE
Store in a tightly closed container at 15–25 °C, away from direct sunlight. Protect from freezing and from prolonged heat.
PACK SIZES
50 g to 5 Kg
REGULATORY
Exact INCI, plant part, solvent and allergen profile verification
How to read these entries. Use levels and pH ranges are typical formulation starting points for a cosmetic raw material, not approvals. A published INCI name does not by itself authorise use: confirm permitted status, maximum concentration, restrictions by product type, labelling and claim rules in every market you sell into, and give every finished product its own safety assessment. Entries marked with a regulatory flag carry a binding limit somewhere — the product page states which framework and what the limit is.
