About this material
Saffron Extract – Standardised (Crocus Sativus Flower Extract (Standardised Crocin)) is a Botanical extract / standardised supplied by MakeYourSkin as a powder for professional cosmetic formulation. Rooted in the Indian Ayurvedic tradition and sourced from India, it is valued for antioxidant, complexion positioning.
What is Saffron Extract – Standardised?
Saffron Extract – Standardised is supplied under the INCI / technical name Crocus Sativus Flower Extract (Standardised Crocin).
It belongs to the Botanical extract / standardised group and is derived from crocus sativus stigma. The material reaches you as a powder. It is an established cosmetic raw material with mature supply and well-understood formulation behaviour.
Key Properties & Benefits
- Antioxidant
- Complexion positioning
- Supplied against a defined species, plant part and extraction solvent, with a botanical dossier on request.
- Carries an authentic Ayurvedic provenance story that resonates strongly with Indian and export consumers.
Uses & Applications
Saffron Extract – Standardised is used in brightening serums, spot-correcting treatments, tone-evening creams, sheet masks, after-sun products and body-brightening lotions.
Typical applications from the catalogue record: Premium serums, kumkumadi-positioned products.
In leave-on skincare it is normally dosed into a serum, ampoule or moisturiser where contact time is long enough for the claim to hold up. In rinse-off formats it is used at a lower level for label presence and sensory contribution rather than measurable performance. In traditional Indian formats it appears in taila, ubtan, lepa and hair-oil preparations, and translates well into modern serum, mask and cleanser formats.
Handling note: Weigh accurately and dissolve or disperse fully before the batch is judged — undissolved powder reads as grit in the finished product.
How to Use — Recommended Use Level
| Typical use level | 0.5–5% for liquid/glycolic extracts; 0.1–1% for dry powder extracts |
|---|---|
| Recommended pH | 4.0–7.0 |
| Addition phase | Water phase, cool-down |
| Solubility | Solubility is grade-dependent. Confirm the exact carrier system and dilution route on the supplier technical data sheet before formulating. |
General rule: always begin at the lower end of the range, confirm the level against the supplier technical data sheet, and validate stability, pH, colour, odour and preservative efficacy on the finished formulation before scaling up.
Technical Specification
| INCI / Technical Name | Crocus Sativus Flower Extract (Standardised Crocin) |
|---|---|
| CAS Number | Not assigned as a single number — botanical, ferment and blended materials are defined by species, part, solvent and specification rather than by one CAS. The applicable CAS or EINECS entries for the exact grade are stated on the supplier CoA. |
| Ingredient Family | Botanical extract / standardised |
| Primary Cosmetic Functions | Antioxidant; complexion positioning |
| Typical Applications | Premium serums, kumkumadi-positioned products |
| Source / Feedstock | Crocus Sativus stigma |
| Origin / Tradition | India / Kashmir |
| Typical Bulk Form | Powder |
| Appearance | White to off-white crystalline or amorphous powder (botanical grades may be coloured) |
| Solubility | Grade Dependent |
| Market Status | Established / trending |
| Catalogue Range | Core Range |
| Storage | Store in the original sealed container in a cool, dry place at 15–25 °C, away from direct sunlight and moisture. Re-seal immediately after weighing; many powders are hygroscopic. |
| Shelf Life | 12–24 months from manufacture; retest date stated on the Certificate of Analysis |
| Vendor | MakeYourSkin |
| MYS Catalogue Code | MYS-N00300 |
Technical Notes
Kashmiri saffron carries genuine premium value — insist on authenticity testing.
Regulatory Note
A botanical INCI name alone is not a specification. Define and document the species, plant part, extraction solvent, drug-to-extract ratio, carrier and preservative system, standardised marker content where relevant, and the pesticide, heavy-metal and microbiological profile. Some species are restricted or prohibited in specific markets — check the destination-market list before you commit to a formula.
Supplier diligence required: Confirm authenticity and adulteration testing; saffron is a high-fraud commodity.
Sold as a cosmetic raw material for professional formulation. A published INCI name does not by itself authorise use: the buyer is responsible for confirming permitted status, maximum concentration, restrictions by product type, labelling and claim rules in every market the finished product is sold in. In India, cosmetics fall under the Drugs and Cosmetics Act 1940 and the Cosmetics Rules 2020 administered by CDSCO, with BIS standards (including IS 4707 Part 2) listing restricted substances. The EU applies Regulation (EC) No 1223/2009 and its Annexes; the United States applies the FD&C Act as amended by MoCRA; Korea, Japan and China operate their own positive lists and functional-cosmetic frameworks. Every finished product needs its own safety assessment.
Reference: Regulatory / scientific reference
Documentation Supplied
- Certificate of Analysis (CoA) for the batch supplied
- Safety Data Sheet (SDS / MSDS) in the current GHS format
- Technical Data Sheet (TDS) with specification, solubility and handling guidance
- INCI declaration and, where assigned, CAS / EINECS numbers
- Botanical dossier: species, plant part, extraction solvent, drug-to-extract ratio and standardised marker content where applicable
- Pesticide residue and allergen statement on request
- Non-GMO statement on request
- Vegan / animal-origin declaration on request
- Halal and Kosher certification on request where the supplier holds it
- Heavy-metal and microbiological test data on request
Available Pack Sizes
This is a high-value material, so it is supplied on our small-pack ladder: 10 g, 50 g, 100 g and 1 Kg. Larger quantities are quoted on request — contact the MakeYourSkin sales desk for availability, lead time and a firm price.
| 10 g | Bench trial, stability screening and claim work |
|---|---|
| 50 g | Pilot batches and small production runs |
| 100 g | Regular production for premium formulas |
| 1 Kg | Full production quantity; larger volumes quoted on request |
Disclaimer & Caution in Use
For external cosmetic use in professionally formulated products only. This is a concentrated raw material, not a finished cosmetic, and it is not intended for undiluted application to skin, for ingestion, or for any medicinal purpose. Wear gloves and eye protection when handling, avoid raising dust with powders, and keep out of reach of children and pets. Always run a patch test on the finished formulation, and validate stability, compatibility, pH and preservative efficacy before sale. Information supplied is offered in good faith as formulation guidance and does not constitute a safety assessment, a regulatory approval or a medical claim.
Fine powder — avoid generating and inhaling dust. Use local exhaust ventilation or a suitable respirator when weighing, and wet the powder into the formulation phase rather than dry-blending in open air.
Specification
| INCI NAME | Crocus Sativus Flower Extract (Standardised Crocin) |
|---|---|
| CAS NUMBER | Not assigned |
| FAMILY | Botanical extract / standardised |
| ORIGIN | India / Kashmir — Crocus Sativus stigma |
| SUPPLY FORM | Powder |
| SOLUBILITY | Grade Dependent — Solubility is grade-dependent. Confirm the exact carrier system and dilution route on the supplier technical data sheet before formulating. |
| TYPICAL USE LEVEL | 0.5–5% for liquid/glycolic extracts; 0.1–1% for dry powder extracts |
| pH RANGE | 4.0–7.0 |
| ADD AT | Water phase, cool-down |
| FUNCTIONS | Antioxidant; complexion positioning |
| USED IN | Premium serums, kumkumadi-positioned products |
| STORAGE | Store in the original sealed container in a cool, dry place at 15–25 °C, away from direct sunlight and moisture. Re-seal immediately after weighing; many powders are hygroscopic. |
| PACK SIZES | 10 g to 1 Kg |
| LEAD TIME | 7–10 days |
| REGULATORY | Confirm authenticity and adulteration testing; saffron is a high-fraud commodity |
How to work with it
The specification's Add at row is the one to read first. Water-phase materials added to a hot oil phase are the most common reason a batch separates.
Measure the finished product, not the premix. Outside the range the activity drops away and, for some materials, the degradation route is what causes complaints.
Then work up through stability and compatibility testing. Higher is not better, and the destination market's limit may sit below your formulation ceiling.