About this material
Liquid Polymeric Emulsifier-Thickener is pre-neutralised inverse-emulsion polymer supplied by MakeYourSkin as pourable white to off-white viscous liquid for professional cosmetic formulation. Sourced in the China / TCM tradition. It is valued for instant cold thickening, o/w emulsification, stabilisation, pseudoplastic flow.
What is Liquid Polymeric Emulsifier-Thickener?
Liquid Polymeric Emulsifier-Thickener is supplied under the INCI / technical name Acrylates/Ammonium Methacrylate Copolymer (and) C13-14 Isoparaffin.
It belongs to the Pre-neutralised inverse-emulsion polymer group. The material reaches you as pourable white to off-white viscous liquid. Pre-neutralised so it thickens on simple cold stirring with no neutralisation step, which saves a heat cycle. Verify the exact INCI string with the supplier as the diluent varies between grades.
Key Properties & Benefits
- Instant cold thickening
- O/W emulsification
- Stabilisation
- Pseudoplastic flow
- Supplied with full documentation — CoA, SDS and specification
Uses & Applications
Typically formulated into cold-process gels and creams, sun care, serums, hair styling.
How to Use — Recommended Use Level
Typical use level: 0.5-3%. Add at the either phase, supplier-dependent. Amphiphilic. It associates with both phases and is usually added to the phase that matches the processing temperature.
Always trial the material in your own base at small scale before scaling up. Use levels are formulation starting points, not approvals.
Technical Specification
- INCI name: Acrylates/Ammonium Methacrylate Copolymer (and) C13-14 Isoparaffin
- Ingredient family: Pre-neutralised inverse-emulsion polymer
- Origin / tradition: China / TCM
- Typical form: Pourable white to off-white viscous liquid
- Solubility: Amphiphilic
- Typical use level: 0.5-3%
- pH range: 4.5–7.5
- Addition phase: Either phase, supplier-dependent
- Pack sizes: 50 g; 225 g; 1 Kg; 5 Kg; bulk on request
Technical Notes
Pre-neutralised so it thickens on simple cold stirring with no neutralisation step, which saves a heat cycle. Verify the exact INCI string with the supplier as the diluent varies between grades.
Regulatory Note
Sold as a cosmetic raw material for professional formulation. A published INCI name does not by itself authorise use: the buyer is responsible for confirming permitted status, maximum concentration, restrictions by product type, labelling and claim rules in every market the finished product is sold in. In India, cosmetics fall under the Drugs and Cosmetics Act 1940 and the Cosmetics Rules 2020 administered by CDSCO, with BIS standards (including IS 4707 Part 2) listing restricted substances. The EU applies Regulation (EC) No 1223/2009 and its Annexes; the United States applies the FD&C Act as amended by MoCRA; Korea, Japan and China operate their own positive lists and functional-cosmetic frameworks. Every finished product needs its own safety assessment.
Documentation Supplied
Certificate of Analysis (CoA) for the batch supplied; Safety Data Sheet (SDS / MSDS) in the current GHS format; INCI and technical specification sheet; allergen, GMO and origin statements on request; vegan, halal and kosher declarations where the supply chain supports them.
Available Pack Sizes
50 g; 225 g; 1 Kg; 5 Kg; bulk on request
Disclaimer & Caution in Use
For external cosmetic use in professionally formulated products only. This is a concentrated raw material, not a finished product: do not apply it undiluted to skin or hair. Wear suitable gloves and eye protection when handling, weigh in a ventilated area, and keep out of reach of children. Patch test every finished formulation. Not for ingestion unless a food or oral-care grade is specifically supplied and documented as such. Seek medical advice in case of eye contact, ingestion or an adverse reaction.
Specification
| INCI NAME | Acrylates/Ammonium Methacrylate Copolymer (and) C13-14 Isoparaffin |
|---|---|
| CAS NUMBER | Not assigned |
| FAMILY | Pre-neutralised inverse-emulsion polymer |
| ORIGIN | China / TCM |
| SUPPLY FORM | Pourable white to off-white viscous liquid |
| SOLUBILITY | Amphiphilic. It associates with both phases and is usually added to the phase that matches the processing temperature. |
| TYPICAL USE LEVEL | 0.5-3% |
| pH RANGE | 4.5–7.5 |
| ADD AT | Either phase, supplier-dependent |
| FUNCTIONS | Instant cold thickening, O/W emulsification, stabilisation, pseudoplastic flow |
| USED IN | Cold-process gels and creams, sun care, serums, hair styling |
| STORAGE | Store at 15–25 °C in a tightly closed container, protected from light. Do not freeze. Some biological materials are supplied chilled — follow the batch documentation. |
| PACK SIZES | 50 g; 225 g; 1 Kg; 5 Kg; bulk on request |
| LEAD TIME | 10–16 days |
| REGULATORY | Sold as a cosmetic raw material for professional formulation. A published INCI name does not by itself authorise use: the buyer is responsible for confirming permitted status, maximum concentration, restrictions by product type, labelling and claim rules in every market the finished product is sold in. In India, cosmetics fall under the Drugs and Cosmetics Act 1940 and the Cosmetics Rules 2020 administered by CDSCO, with BIS standards (including IS 4707 Part 2) listing restricted substances. The EU applies Regulation (EC) No 1223/2009 and its Annexes; the United States applies the FD&C Act as amended by MoCRA; Korea, Japan and China operate their own positive lists and functional-cosmetic frameworks. Every finished product needs its own safety assessment. |
How to work with it
The specification's Add at row is the one to read first. Water-phase materials added to a hot oil phase are the most common reason a batch separates.
Measure the finished product, not the premix. Outside the range the activity drops away and, for some materials, the degradation route is what causes complaints.
Then work up through stability and compatibility testing. Higher is not better, and the destination market's limit may sit below your formulation ceiling.